Pre Order Snowboard

Introducing The Ultimate Snowboarding Experience.

Get ready to conquer the slopes like never before. YES Snowboard's revolutionary Tapered UnderBite technology combines the best of both worlds: the directional drive and effortless float of a tapered board, without compromising on edge hold or the ability to power through turns— a common drawback of most tapered boards. Unlike other boards, the PYL maintains a more traditional width and length, providing stability and control that snowboarders crave. Crafted with an innovative wood core and natural dampening, this board elevates your performance to new heights, delivering a refined and unparalleled ride. Building on the rich heritage of the PYL, renowned designer Mark Kowalchuk has breathed new life into this iconic masterpiece. With enhanced features and an even stronger legacy, the PYL stands as a testament to our commitment to pushing the boundaries of snowboarding innovation. Unleash your full potential on the mountain with the YES Pick Your Line snowboard where style, precision, and exhilaration meet.

Rider Type:  All-Mountain / Freeride

Shape: Directional 

Flex: 7/10 

Ability Level: Advanced / Expert

Rocker: Rocker / Camber / Rocker

FEATURES:

CAMBER

CamRock 1-4-2 – The response of camber with the floatability of rocker. Camber between your feet acts as a spring, keeping your contact points on the ground as you go in and out of turns and allowing you to keep that edge hold longer. Once compressed the camber will accentuate the rocker and lift the nose out more, allowing it to float.

SHAPE

Directional

Tapered UnderBite – Each side of the board’s effective edge is segmented into 3 distinct parts that step horizontally inward rather than tapering. Traditional “tapered boards” take the full sidecut and pull the tail inward, which is away from the arc of your turn – this is why they tend to wash out under hard carving. Tapered UnderBite corrects this by increasing the sidecut depth as you move towards the tail creating a corrective “hook” to the taper. The board blends into turns effortlessly, and has the directional drive and float you’d expect from a tapered board.

CORE

Weightless Core – The Weightless Core strikes a critical balance between lightweight and strength. Using a lower density species of Poplar in areas that are not as structured and Paulownia in the areas that are, Yes. was able to shave precious weight. This helps the board not only float, but "feel" floaty.

Triaxal Glass

BASE

Sintered True – True Sintered bases are harder and more expensive than extruded and can be faster for those that ride aggressively.

SPECS:

Introducing the All-out Snowboard, your ultimate winter companion that combines surf-inspired vibes with YES Snowboard's unique touch. Carefully crafted to cater to all your snowboarding needs. With its tapered MidBite outline and slamback inserts, you can conquer those epic powder days like never before. Say goodbye to switching boards throughout the season because this versatile gem is the only one you’ll need. Designed with a twin construction, the All-out Snowboard is not just limited to powder shredding. It effortlessly transforms into a freestyle powerhouse, ready to dominate the park and pipe. Picture yourself riding the waves of an empty pipeline—it’s an exhilarating dream that becomes a reality with this board. Embrace the winter season to the fullest and optimize your snowboarding experience with the All-out Snowboard. Whether you’re seeking adrenaline-fueled adventures or soulful rides, this board has you covered

Rider Type:  All-Mountain

Shape: Directional Twin

Flex: 7/10

Ability Level: Advanced / Expert

Rocker: Rocker / Camber / Rocker

CAMBER

Traditional Camber

SHAPE

Directional Twin - best of both worlds

Tapered Midbite blends the response of a narrow waist width with the stability of a wider nose and narrower tail for powder flotation. The design steps a single section of each sidecut inwards between the insert packs. This single-long disruption of the sidecut between the bindings makes the waist width narrower, providing a quicker edge-to-edge response. Meanwhile, from your bindings out to the end of the sidecut, we maintain a wider board width that improves float in pow and is a stable platform. The Step inwards on the front is deeper than the Step outwards on the back creating a slight taper in the tail allowing the tail to be just a little narrower than the nose but without losing the twin feel.

CORE

Poplar Paulownia Bamboo - Creates Creates a lighter, more responsive core than the Full Poplar. The Poplar + Bamboo uses the same durable core, lightens it up by replacing 30% of the Poplar with Paulownia, and then inserts two bamboo stringers down the full length for added pop and response.

Triax Glass

BASE

Sintered True

SPECS

A classic pill freestyle shape from his beautiful mind. The C3 cambered Head Space is Forest’s twin freestyle mind expansion tool. A proven street slayer, rips any freestyle situation you might encounter at your home resort or out there with the crew. Magne-Traction® edge control, FSC certified eco core, sintered eco sublimated base. Find your feet with a board that knows anything and everything is possible.

RIDER TYPE: All Mountain / Freestyle

Shape: Twin

Flex: Medium

Ability Level: Intermediate / Advanced

CAMBER

C3 Camber – Aggressive dominant camber zones out to the contacts combined with mild rocker between your feet. Subtle Banana rocker gives freestyle freedom with maximum end-to-end stability for big, high-speed lines. For aggressive, skilled riders.

CORE

G Lite 2 FCS Certified Aspen + Paulownia Core – Light, strong, and poppy.

LAMINATES

Triaxial / Biaxial Fiberglass – Strong and poppy.

SIDEWALLS

UHMW Sidewalls – Tough and fast.

BASE

Eco Sublimated Sintered Base – Fast, tough, and holds wax.

EDGES

Magne-Traction® – 7 strategically located and sized edge serrations provide unreal edge hold and control in all conditions.

TOPSHEET

Eco Sublimated Poly Top – Tough and environmentally nice.

SPECS:

Fast and powerful, the Kazu Kokubo Pro is a super versatile all-mountain board that can take you both in and out of bounds. While many great powder boards are large and surfy, the  Kazu Kokubo Pro comes in a compact chassis with a powder nose and a slightly tapered tail, making this award-winning series quick and maneuverable for all kinds of snow and riding terrain. Refined by Kazu's extensive backcountry experience in Japan, this board boasts a unique shape and construction, featuring a setback, directional shape, powerful, lightweight Panda Hover Core, and newly upgraded base material and structure, so you can prepare yourself for powerful turns, solid stability, and ultimate control.

Rider Type:  Freeride / Powder

Shape:  Directional

Flex: 6.5/10  Medium / Stiff

Rocker: Rocker / Camber  

Ability Level: Advanced / Expert

SPECS:

A True Twin shape, buttery flex, and True Camber profile give the Tweaker a playful, evenly balanced board feel, but don’t mistake the Tweaker for your average freestyle twin. The Tweaker’s unique double-radius nose and tail profile maximize the running length of the blunted shape and offer amazing float, while the V-core profiling on the Tweaker’s Classic Core makes the flex softer between the feet for nimble maneuverability and stiffer in the tips for supreme stomp-ability. The Tweaker has Traction Tech 2.0 edges for added edge grip riding through rough snow, and the spooned nose and tail edges on the 3D Contour Base 3.0 reduce edge catch and make it easy to butter and boardslide. Finished with a Sintered 8000 base and an Eco-plastic top sheet, the Tweaker is a durable and high-performance modern manifestation of a timeless true twin snowboard shape.

Rider Type:  All-Mountain / Freestyle

Shape: True Twin

Flex: 6/10 - Medium

Rocker: Camber

Ability Level: Advanced / Expert

CAMBER

A traditional full camber profile offers the most edge response and stability possible. The camber radius tapers into the 3D contoured base and releases the edges so you aren't getting hooked up and thrown off, offering a less-catchy feel while still being responsive.

Flex: 6/10 (1=soft, 10=stiff)

Medium flex boards offer good stability at speed and are easy to turn and maneuver.

Twin Flex

This board flexes the same in the nose and tail, allowing you to ride, pop, and press the same in regular and switch.

V-Core 3.0

Boards with V-Cores are slightly softer in the very center of the board for improved maneuverability and stiffer from the inserts through the tip and tail for stability and pop.

SHAPE

Constructed the same tip to tail, this board is designed to provide a consistent performance when riding in both switch and regular. Twin Shape.

BASE

3D Base Contour 3.0

A moderate 3D base contour featuring an even balance of 7mm of bevel in the nose and tail. Spoon makes the base roll through turns instead of landing flat, making your turns smoother and more natural.

CORE 

FSC Classic Core - A full wood premium poplar core that offers great pop, even flex, and reliable durability.

Biax Fibreglass - A dual-direction, dual-layer, stitched fiberglass laminate that provides a fun, forgiving and snappy ride.

Sustainable Flax / Basalt Stringers

New Jones exclusively sustainable stringers made with 100% natural fibers. Composite Flax and Basalt stringers help transfer power to the edges, improve torsional response, and absorb board chatter.

BASE

 Sintered 8000- This new super durable base material is made from Ultra-High Molecular Weight Polyethylene and carbon, making it easily repairable, highly wax absorbent, and super fast.

EXTRA FEATURES

Oversized Recycled Edges - Exactly what it sounds like, enhanced sustainability and added durability.

Eco-Plastic Topsheet - An ultralight chip/scratch-resistant top sheet made from castor beans. Good for your board, good for the environment.

Traction Tech 3.0 - Like a serrated knife cutting through the snow, Traction Tech adds multiple contact points along the edge of the board for enhanced grip and edge hold in all conditions.

Wend Natural Wax - Jones boards are ready to shred straight out of the shop and are factory waxed with Wend natural wax.

Bio Resin - All Jones boards are built with bio-based, renewable epoxy instead of petroleum-based epoxy. The raw materials used to make Bio Resin are co-products or waste products of other plant-based industrial processes. Producing Bio Resin requires 33% less greenhouse gas emissions than conventional epoxy.

Recycled Black ABS - ABS Plastic is one of the necessary evils of snowboard production. Jones improves the sustainability of their snowboards by using only recycled plastic.

Factory Tuned - All Jones snowboards are factory de-tuned at the tip and tail, so you can go riding straight away.

Blunt Tips - A more freestyle-focused shape for reduced swing weight.

Forever Flex -  Jones boards now are finished slightly overbuilt and are broken in using specialized machinery that mimics riding use. This flexes the fibers and epoxy and allows them to settle into their final state, similar to riding the boards for 20 days. This provides a much more accurate flex rating.

SPECS:

The Supercharged Freestyler

The Tweaker Pro is a supercharged true twin featuring a full camber profile that’s built for high-speed terrain park trickery and ripping lines in any terrain.

Rider Type:  All-Mountain / Freestyle

Shape: True Twin

Flex: Med Stiff and Lively

Rocker: Camber

Ability Level: Advanced / Expert

Wide: For boot sizes 

CAMBER

A traditional full camber profile that offers the insane edge response of camber without the usual hang-ups. The camber radius tapers into the beveled 3D Contour Base at the tips which releases the edges where they
like to hook and balances the pop and directional stability of camber with a looser, less-catchy feel.

CORE

Power Core - Triple-density full wood core featuring hardwood bamboo stringers for added pop and durability plus paulownia for weight savings.

Koroyd - Award-winning synthetic core material developed for the aerospace industry. Koroyd is the lightest and dampest core material we’ve ever tested. It absorbs vibrations and adds response at a fraction of the weight of wood which enhances board control and riding confidence

Triax Fibreglass - Multi-axis, stitched fiberglass laminate that offers a precise and responsive ride in any terrain or snow conditions.

Power Basalt Stringers - Sustainable stringer made with 100% natural fibers. Basalt stringers improve torsional response and transfer power from under your feet to the tips of the board to help eliminate nose and tail chatter.

LAMINATES

Carbon/Innegra reinforcement

BASE

Sintered 9900 Base - Premium base material made from Ultra-High Molecular Weight Polyethylene (UHMW-PE) and carbon. Base is highly wax absorbent, easy to repair and wicked fast.

TOPSHEET

Eco-Plastic - Bio-plastic topsheet made from Castor beans. This eco-material is ultralight, chip/scratch resistant and water/ snow repellent (snow sticks less to topsheet).

EDGES

Oversized recycled steel edges for added durability and improved production sustainability.

The Mountain Twin is a versatile directional twin designed for playful shredders who want one board that can ride-it-all.

It's built to shred the whole mountain like it's an endless skatepark without sacrificing float in pow or stability for bombing lines. The Twin's shape features blunt tips for reduced swing weight, Traction Tech edges to keep you locked in on firm snow and a 3D Contour Base that makes every turn more effortless. With a mid-stiff twin flex and a CamRock profile the Mountain Twin excels at poppin' pillows and pressin' boxes while it's also an easy board to turn and finesse in tight terrain. To complete the performance package, the Mountain Twin has a super fast and durable Sintered 8000 base and added stance options with the Freestyle/Freeride Stance pack.

Rider Type: All-Mountain / Freestyle

Shape: Directional Twin

Flex: 7/10 Medium - Stiff

Rocker: Rocker / Camber / Rocker

Ability Level:  Intermediate / Advanced

CAMBER

Featuring a floaty, freeride nose matched with a freestyle tail, the Frontier is ideal for pow days, park days and every day in between. The Frontier’s Directional shape, Directional Rocker profile and Traction Tech 2.0 edges provide confident stability riding through tech terrain or rough snow while the spooned nose+tail edges on the 3D Contour Base 1.0 reduce edge to catch and make it easy to turn in tight terrain. The Frontier offers high performance without skimping on materials as it’s built with a Sintered 8000 base, an Eco-plastic topsheet, and a Classic Core that is specially profiled between the feet for added pop.

Rider Type:  All Mountain / Freestyle / Freeride

Shape:  Directional Twin

Flex:  Medium

CAMBER

Directional Rocker – A hybrid rocker/camber flex pattern defined by more tip rocker then tail rocker and camber between the bindings. The rockered tip floats the board’s nose and improves maneuverability while the camber underfoot provides edge hold and response. A slightly rockered tail maintains the power and stability of a traditional board but helps keep the tail catch-free initiating turns and landing switch.

Flex

Directional Flex Pattern

Flex Rating – 6 (1 Soft - 10 Stiff)

Forever Flex – All Jones boards are broken in using specialized machinery that mimics extreme riding use to help stabilize the flex and rocker profile of a board for it's lifetime.

Shape

3D Base Contour 1.0 – Subtle yet effective 3D-base contours featuring an even balance of 2mm spoon bevel in the nose and 2mm spoon bevel in the tail. Spoon bevel starts just after the rocker point.

Progressive Sidecut – At the far ends of the sidecut, the radius is incrementally increased as the edge reaches the contact point. Gradually increasing the sidecut radius towards the

contact point delivers smoother turn initiation and exit as the edge tracks in and out of the snow with a less abrupt transition.

Blunt Nose – "How a board glides in powder, crust, corn or any snow more than an inch deep is dictated by it's front contact point and just past it. Next time you are in soft snow watch how much snow comes over the corner of the nose near the contact point. The billowing snow coming out from behind the tip means you are plowing through it which is obviously slowing you down. By adding a blunt nose you get the float benefits of a much longer nose without the 'snow plow' rounded tip and it's extra swing weight." - Jeremy Jones

Core

FSC™ Classic Core – Full wood premium poplar core that offers fun pop, even flex and solid durability.

V-Core – Boards with V-Cores are slightly softer in the very center of the board for improved manouverability and stiffer through the tip and tail for stability and pop.

Laminates

Biax Fiberglass – A dual-direction, dual-layer, stitched fiberglass laminate that provides a fun, forgiving and snappy ride.

Sidewalls

Recycled ABS – ABS plastic is one of the necessary evils of snowboard production. Jones improves the sustainability of their snowboards by using only recycled plastic

Base

Sintered 8000 Base – New super durable material made from Ultra High Molecular Weight polyethylene and carbon.

Flip Flop Base – Flip-Flop bases improve board sustainability by reducing p-tex waste.

Edges

Traction Tech 2.0 – Like a serrated knife slicing into the snow, Traction Tech improves your edge grip by adding multiple contact points along the running length of your board.

Oversized Recycled Edges – All Jones boards are made with oversized recycled steel edges for added durability and improved production sustainability.

Topsheet

Eco-Plastic Topsheet – Bio-plastic topsheet made from Castor beans. This eco-material is ultralight, chip/scratch resistant and water/snow repellent (snow sticks less to topsheet).

Additional Features

Bio Resin – All Jones boards are now built with bio-based, renewable epoxy instead of petroleum based epoxy. The raw materials used to make Super Sap Bio-Resin are co-products or waste products of other plant-based industrial processes. Producing Super Sap requires 33% less greenhouse gas emissions than conventional epoxy.

Factory Tuned – All Jones snowboards are factory de-tuned at the tip and tail so you can go right from the shop to the mountain.

Wend Natural Wax – Jones boards are ready to shred straight out of the shop and are factory waxed with WEND natural wax.

Binding Compatibility

2 x 4 Insert Pattern

 SPECS:

The Aviator 2.0 is a hard charging directional twin built for expert all-mountain riders who like to rail turns and stomp airs anywhere on the mountain. This Aviator was designed in collaboration with Jones team riders Victor de la Rue and Jimmy Goodman. What sets the Aviator apart is its FULL CAMBER profile. Victor and Jimmy swear by the power of full camber for edging on steeps and landing tricks on the tail. The Aviator also features a 3D Contour Base 2.0, Triax Fiberglass, Carbon/ Innegra Reinforcement, an ECO-Plastic top sheet and Traction Tech 3.5 edges. The 3D Contour Base starts after the contact point and helps eliminate edge catch and improve turn fluidity while the Triax fiberglass and Carbon Innegra layer under the
Eco-Plastic top sheet offers supreme pop and lightning-fast response. The Aviator’s Power Core includes a section of ultralight Koroyd in the nose absorbs chatter at a fraction of the weight of wood.

Rider Type: All-Mountain / Freestyle

Shape: Directional Twin

Flex: Stiff  8/10

Rocker: Camber

Ability Level:  Advanced / Expert

NEW SIZE 157W