Quad Camber – The aggressive characteristics of camber blended with rocker on the tip and tail to make the board playful and agile in pow. Quad Camber built with a blend of different radiuses and is more forgiving than a regular camber but maintains the reactivity and pop.

SHAPE

True Twin – Freestyle specific: Identical tip/tail lengths, symmetrical core profiling, flex and a centered binding stance.

EQ Rad Sidecut – Equalizer straight lines and Radial lines blended together for the perfect balance of agility and fun.

CORE

A FSC certified full-length Aspen wood core with high-density birch strips for enhanced insert strength.

BA LD - The use of low-density fibres creates a lighter board that keeps its playful forgiving flex forever.

Popster - Pop meets performance. Popster shapes the woodcore profile with strategically placed variations of thickness, providing skate-influenced snap and pop.

LAMINATES

Biaxial Medium Density Fiberglass – Medium density European-made fiberglass layers guarantee a consistent quality level, for light and lively boards.

Biaxial Low Density Fiberglass – Low-density fibers allow for lighter boards that keep their playful forgiving flex forever.

SIDEWALLS

EDGES

Freestyle Edge Bevel – From detuning the tip and tail to a 2-degree edge holding tune throughout the key parts of the sidecut, back to a 3-degree bevel between the feet. This delivers the complete blend of edge hold and forgiveness on rails.

2 x 4 Insert Pattern

Tapered Directional – Tail width is slightly tapered (2-20mm). This loosens up turning initiation and improves flotation in deeper snow without sacrificing edge hold on hardpack.

Quadratic Sidecut – A blend of elliptic curves for easy turn initiation, effortless direction changes and fluid edge to edge transitions.

Rocket Science – A slightly wider and shorter design for more maneuverable and stable boards.

CORE

Aspen Select Core – Every single FSC-certified wood strip is hand selected to ensure unparalleled core quality and lightness.

Popster – Popster's shaped core profile thins out under foot and thickens outside your bindings before tapering again at tip and tail to maximize the natural snap and pop of wood. Feels like your skateboard kicktail finally connected with your snowboard.

LAMINATES

C/FX Basalt - This version of the C/FX is composed of Basalt & fibreglass for power and smooth ride.

Greenpoxy Resin - High performance with low environmental impact, this bio-epoxy resin is made with 28% of its molecular structure derived from plants.

Damplifier - Cork and ABS in the nose of the board to give you vibration absorption and eco friendly dampening.

SIDEWALLS

All-Mountain Edge Bevel – A 1° edge holding tune throughout the key parts of the sidecut meets a 2° bevel between the feet. This delivers the most solid edge hold with no hang-ups.

BINDING COMPATIBILITY

2 x 4 Insert Pattern

SPECS:

Rock Out Camber – Flat between your bindings for stability, camber near the feet for response, and rocker on the tip/tail for pressability.

SHAPE

Directional Twin – A twin shape for freestyle moves with a directional flex for power at high-speed.

Quadralizer Sidecut – Explosive combination of Equalizer and Quadratic sidecuts allows high speed carving as well as superior edge control in tight spots.

CORE

LAMINATES

SIDEWALLS

EDGES

Rock Out Camber – Flat between your bindings for stability, camber near the feet for response, and rocker on the tip/tail for pressability.

SHAPE

Directional Twin – A twin shape for freestyle moves with a directional flex for power at high-speed.

Quadralizer Sidecut – Explosive combination of Equalizer and Quadratic sidecuts allows high speed carving as well as superior edge control in tight spots.

CORE

LAMINATES

SIDEWALLS

EDGES

Rock Out Camber – Flat between your bindings for stability, camber near the feet for response, and rocker on the tip/tail for pressability.

3 (1 Soft - 5 Stiff)

Directional Twin – A twin shape for freestyle moves with a directional flex for power at high-speed.

EQ Rad Sidecut – Equalizer straight lines and Radial lines blended together for the perfect balance of agility and fun.

Aspen Select Core – Every single FSC certified wood strip is hand selected to ensure unparalleled core quality and lightness.

Popster – Popster's shaped core profile thins out under foot and thickens outside your bindings before tapering again at tip and tail to maximize the natural snap and pop of wood. Feels like your skateboard kicktail finally connected with your snowboard.

Ghost Basalt Stringers – Basalt stringers are sewn into a trail layer for durable pop, control, and damp ride at speed, and easy maneuverability when you're keeping it mellow.

Biaxial Medium Density Fiberglass – Medium density European-made fiberglass layers guarantee a consistent quality level, for light and lively boards.

Royal Rubber Pads – Soft Royal Rubber blocks inserted into the high-pressure zones of the board's ABS Sidewalls dampen vibration and mellow out big impacts.

Sintered Base – An industry standard for quality sintered base materials. Provides a moderate balance between the speed created by a hard surface and good wax retention.

Fine Stone Finish – Fine stone finish helps speed up in powder or softer snow conditions.

All-Mountain Edge Bevel – A 1° edge holding tune throughout the key parts of the sidecut meets a 2° bevel between the feet. This delivers the most solid edge hold with no hang-ups.

2 x 4 Insert Pattern

Rock Out Camber – Flat between your bindings for stability, camber near the feet for response, and rocker on the tip/tail for pressability.

Flex Rating – 5 (1 Soft - 5 Stiff)

Directional Twin – A twin shape for freestyle moves with a directional flex for power at high-speed.

Quadralizer Sidecut – Explosive combination of Equalizer and Quadratic sidecuts allows high speed carving as well as superior edge control in tight spots.

Popster Booster – Add carbon stringers to the standard popster and you get all the energy from under your feet radiating on the tip/tail maximizing pop.

Ghost Green Core – Ghost Green Core components have been selected and designed to optimize pop and reduce weight while utilizing sustainable attributes of a super light paulownia wood.

Biaxial Medium Density Fiberglass – Medium density European-made fiberglass layers guarantee a consistent quality level, for light and lively boards.

ABC Wrapper – ABC Wrapper is a patented process using structural bamboo veneers to reduce fiberglass and resin content in each board by 40%.

Royal Cork Rails – Keep the planet and your edges in good shape with this eco version of Royal Rubber Rails. All the impact and chatter absorption you need in a planet-friendly cork package.

Sintered EG – Engineered for a super fast glide in everything from fresh pow to sticky spring snow. Sintered material provides superior wax retention, Gallium strengthens impact resistance, and the Electra finish gives a turbocharged glide

Fine Stone Finish – Fine stone finish helps speed up in powder or softer snow conditions.

Freestyle Edge Bevel – From detuning the tip and tail to a 2-degree edge holding tune throughout the key parts of the sidecut, back to a 3-degree bevel between the feet. This delivers the complete blend of edge hold and forgiveness on rails.

2 x 4 Insert Pattern

SPECS:

Rock Out Camber – Flat between your bindings for stability, camber near the feet for response, and rocker on the tip/tail for pressability.

SHAPE

True Twin – Freestyle specific: Identical tip/tail lengths, symmetrical core profiling, flex and a centered binding stance.

Quadralizer Sidecut – Explosive combination of Equalizer and Quadratic sidecuts allows high speed carving as well as superior edge control in tight spots.

Popster Booster - Pop meets performance. Popster shapes the woodcore profile with strategically placed variations of thickness, providing skate-influenced snap and pop. Booster adds carbon stringers which spread underfoot energy more effectively to the tip and tail for maximum ollie power.

Ghost Carbon Beam - Two carbon beams inserts on the tip and tail of the board for maximum pop and increased stability during high speed charging.

A full Aspen, FSC-certified wood core with every piece being hand selected for unrivaled quality.

LAMINATES

Triax/BA MD Glass - Triaxial Fibreglass that increases durability and stability, plus Medium Density fibreglass that guarantees consistent quality and light, lively performance.

Greenpoxy Resin - High performance with low environmental impact, this bio-epoxy resin is made with 28% of its molecular structure derived from plants.

SIDEWALLS

Royal Rubber – These soft rubber blocks, inserted into Salomon’s ABS Sidewalls in the high pressure zones, smooth out the edge contact like no other construction, whatever the conditions.

BASE

Sintered Base – Provides a moderate balance between the speed created by a hard surface and good wax retention.

Medium Stone Finish – A medium structure finish that improves base glide. Quicker in all snow conditions, from cold morning corduroy to spring slush.

EDGES

Royal Rubber Rails - Full-length rubber sidewalls provide the highest level of dampening and protection.

TOPSHEET

Castor Bean Topsheet - A sustainable option to discontinue petroleum-based topsheet products by using bio-sourced Castor Bean. Durable and eco-friendly!

2 x 4 Insert Pattern

SPECS: