YES. Hel Yes Snowboard 2024Regular price $949.99 Save $-20.00
After winning four consecutive Good Wood Awards, the Hel YES. has anchored itself as one of the industry's top standards for women's free-riding. If you are a powerful freeriding lady you will fall in love with this one. Plow through the crud like it ain't no thing, carve the piste like it's made of butter, and slash the fresh powder all while feeling stable, powerful and light on your feet. HEL YUS!!
Rider Type: All-Mountain / Freeride
Shape: Directional Twin
Flex: 7/10 Stiff
Ability Level: Advanced / Expert
Rocker: Rocker / Camber / Rocker
Directional CamRock – The response of camber with the floatability of rocker. Camber between your feet acts as a spring, keeping your contact points on the ground as you go in and out of turns and allowing you to keep that edge hold longer. Once compressed the camber will accentuate the rocker and lift the nose out more, allowing it to float.
Flex Rating – 7 (1 Soft - 10 Stiff)
UnderBite edges re-distribute a rider’s weight in such a way that it enhances turning ease and edge hold. Creating divots inward at the binding area reduces and disrupts the surface area of the edge that has contact with the snow while the board is turning. This increases the edge pressure by distributing your weight/energy in the areas where you need it - from the binding out, and through the center of the board where the carving arc is taking place. This segmentation of the sidecut into 3 key zones focuses your body weight onto areas that initiate, hold and release turns.
Poplar / Paulownia / Bamboo – Creates a lighter, more responsive core than the Full Poplar. The Poplar + Bamboo uses the same durable core, lightens it up by replacing 30% of the Poplar with Paulownia and then inserts two bamboo stringers down the full length for added pop and response.
Sintered True – Just like it says. Pellets or course powder is pressed until it forms a solid. There are several suppliers for our entire industry and they each have different codes for them, depending on the color and transparency. These codes can make it seem like you’re getting many different kinds and grades of sintered but they’re all pretty much the same as far as you and I will ever tell. True Sintered is harder and more expensive than extruded and it can be faster for those that ride aggressively fast. But to do that, it needs to be waxed and prepared for local conditions.
2 x 4 Inserts
Additional Slamback Inserts
|Board Length (cm)||146||149||152||155|
|Tip Length (cm)||19,5||20||20,5||22|
|Tail Length (cm)||19,5||20||20,5||22|
|Effective Edge Length (cm)||111||113||115||117|
|Contact Length (cm)||107||109||111||111|
|Waist Width (cm)||23,9||24,1||24,2||24,4|
|Front Foot Width (cm)||24,4||24,7||24,8||25|
|Rear Foot Width (cm)||24,6||24,8||25||25,3|
|Tip Width (cm)||28,3||28,5||28,6||28,8|
|Tail Width (cm)||28,3||28,5||28,6||28,8|
|Sidecut (m)||6.7 (MULTIPLE)||6.9 (MULTIPLE)||7.1 (MULTIPLE)||7.3 (MULTIPLE)|
|Ref. Point (cm)||49,5||50,8||53,3||54,6|
|Ref. Stance Setback (mm)||1||1||1||1,5|
|Min Ref. Stance Width (cm)||45,5||46,8||49,3||50,6|
|Max Ref. Stance Width (cm)||53,5||54,8||57,3||58,6|
|Rider Weight (kg)||45-63||50-68||54-72||59-77|