Winter New Arrivals

An absolute weapon for big mountain riders who demand only the best in the steep, deep and fast freeriding conditions. This one is just for the expert freerider. An all-conditions freeride board that is unbelievably responsive and stable for high-speed freeriding and freeride competitions

Rider Type:  All Mountain / Freestyle / Freeride

Rider Ability: Advanced / Expert

Shape:  Directional 

Flex:  Stiff

CAMBER

Directional Rocker - A hybrid rocker/camber flex pattern defined by more tip rocker than tail rocker and camber between the bindings. The rockered tips floats the board’s nose and improves maneuverability while the camber underfoot 

SHAPE

Directional Shape

3D Contour Base 3.0 - Freeride-focused 3D Contour Base featuring 7mm of spoon bevel in the nose and 0 to 7mm of spoon bevel in the tail. The spoon bevel starts at the rocker point.

The center of the board is perfectly flat with no spoon bevel on the edges between the contact
points. The flat base allows instantaneous edge engagement between the feet when you lean into a turn.

The spoon bevel starts at the contact point. The bevel increases very gradually so there is not an abrupt transition between the flat center of the board and the raised tip and tail edges

The spoon bevel is most defined at the tip and tail of the board. The rounded edges at the tips reduce edge catch and drag.

12.5mm Taper

CORE

Fusion Carbon - The Fusion Core is Jones's lightest wood core yet. The core is made from mostly paulownia with specifically positioned pockets of poplar for improved durability and response.

Power Plates - New wood core design featuring specially positioned dual-layer plates on both sides of the insert packs that help transfer energy, enhance board response and increase edge impact durability

Power Core - Triple-density full wood core featuring hardwood bamboo stringers for added pop and durability plus paulownia for weight savings.

Koroyd - Award-winning synthetic core material developed for the aerospace industry. Koroyd is the lightest and dampest core material we’ve ever tested. It absorbs vibrations and adds response at a fraction of the weight of wood which enhances board control and riding confidence.

Carbon / Innegra Reinforcement - Carbon Innegra fiber forms an ultra-tough hybrid composite layer that dampens the board torsionally and from tip to tail. Made in the USA.

Power Basalt Stringers - Sustainable stringer made with 100% natural fibers. Basalt stringers improve torsional response and transfer power from under your feet to the tips of the board to help eliminate nose and tail chatter

Float Pack Inserts - Allows super setback stance for deep pow days.

TOPSHEET

Ash Venneer Wood  - Thin ash wood veneer layer that functions as both a protective topsheet and a global reinforcement layer. The thin wood stringers that make up the topsheet provide even flex and suck up chatter from uneven snow conditions.

BASE

Ultra Base - Jones exclusive base material that sets new performance standards. Lab results and snow testing
show 25% better wax absorption, better glide in warm/ wet snow and better durability for grinding. We’ve also doubled the amount of wax and mixed multiple wax types for a faster factory wax in a wider range of conditions.

EDGES

Oversized recycled steel edges for added durability and improved production sustainability.

OTHER TECH

Forever Flex is a manufacturing process that helps stabilize the flex and rocker profile of a board for
it’s lifetime. Our boards now finish the first stages of production slightly overbuilt and then we “break them in” using specialized machinery that mimics extreme riding use. By flexing the fresh board fibers and epoxy at the factory the materials settle in to their final arrangement within the board layup much the same as if you rode the board for 20 days. This process helps us narrow our production tolerances so the board you buy has a more accurate specified flex and rocker profile that will change less as you ride it more.

STATS

                   158   161   162W   164   165W

Waist           24.9   25.2   26.3    25.4     26.6
Sidecut         8.5     9.1      9.3     9.3      9.4

Freestyle twin, poppy, playful, full camber Ideal for freestyle trickery and all-mountain ripping.

The Women’s Tweaker is a freestyle focused true twin featuring a full camber profile that’s built to pop ollies, toss tricks, and rip fun lines in any terrain.

Rider Type:  All-Mountain / Freestyle

Shape: True Twin

Flex: Medium - Playful

Rocker: Camber

Ability Level: Advanced / Expert

CAMBER

True Camber - A traditional full camber profile that offers the insane edge response of camber without the usual hang-ups. The camber radius tapers into the beveled 3D Contour Base at the tips which releases the edges where they like to hook and balances the pop and directional stability of camber with a looser, less-catchy feel.

CORE

Control Core - Dual-density full premium wood core featuring a 2:1 paulownia to poplar stringer ratio that keeps core light but ultra damp.

Power Basalt Stringers - Sustainable stringer made with 100% natural fibers. Basalt stringers improve torsional response and transfer power from under your feet to the tips of the board to help eliminate nose and tail chatter.

Biax Fiberglass - A dual-direction, dual-layer, stitched fiberglass laminate that provides a fun, forgiving and snappy ride.

SHAPE

3D Contour Base 2.0 - Moderate 3D Contour Base featuring an even balance of 4mm spoon bevel in the nose and 4mm spoon bevel in the tail. Spoon bevel starts at the rocker point.

Double Radius Tips

BASE

Sintered 8000 - Super durable base material made from Ultra-High Molecular Weight Polyethylene (UHMW-PE) and carbon. Base is easy to repair, easy to wax and super fast.

EXTRA FEATURES

Oversized Recycled Edges - Exactly what it sounds like, enhanced sustainability and added durability.

Eco-Plastic Topsheet - An ultralight chip/scratch-resistant top sheet made from castor beans. Good for your board, good for the environment.

Wend Natural Wax - Jones boards are ready to shred straight out of the shop and are factory waxed with Wend natural wax.

Bio Resin - All Jones boards are built with bio-based, renewable epoxy instead of petroleum-based epoxy. The raw materials used to make Bio Resin are co-products or waste products of other plant-based industrial processes. Producing Bio Resin requires 33% less greenhouse gas emissions than conventional epoxy.

Recycled Black ABS - ABS Plastic is one of the necessary evils of snowboard production. Jones improves the sustainability of their snowboards by using only recycled plastic.

Factory Tuned - All Jones snowboards are factory de-tuned at the tip and tail, so you can go riding straight away.

Blunt Tips - A more freestyle-focused shape for reduced swing weight.

Forever Flex -  Jones boards now are finished slightly overbuilt and are broken in using specialized machinery that mimics riding use. This flexes the fibers and epoxy and allows them to settle into their final state, similar to riding the boards for 20 days. This provides a much more accurate flex rating.

SPECS:

The Twin Sister is an inspired all-mountain board for riders who want a playful board that excels in any terrain or snow condition. Featuring a directional twin shape, CamRock profile, and a friendly flex, the Twin Sister offers amazing float in pow, turns on a dime, and is easy to ride switch, or take into the terrain park. Traction Tech 2.0 keeps the Twin Sister locked in every turn when the snow gets firm and the sintered 7000 base is hyper-fast. For added ECO performance, the Twin Sister features an ECO-plastic top sheet. The Twin Sister is built with an FSC Mountain core that is specially profiled between the feet for added pop.

Rider Type:  All Mountain / Freestyle

Shape: Directional Twin

Flex: Stiff 7/10

Rocker:  Rocker / Camber / Rocker

Ability Level: Intermediate / Advanced

CAMBER

A True Twin shape, buttery flex, and True Camber profile give the Tweaker a playful, evenly balanced board feel, but don’t mistake the Tweaker for your average freestyle twin. The Tweaker’s unique double-radius nose and tail profile maximize the running length of the blunted shape and offer amazing float, while the V-core profiling on the Tweaker’s Classic Core makes the flex softer between the feet for nimble maneuverability and stiffer in the tips for supreme stomp-ability. The Tweaker has Traction Tech 2.0 edges for added edge grip riding through rough snow, and the spooned nose and tail edges on the 3D Contour Base 3.0 reduce edge catch and make it easy to butter and boardslide. Finished with a Sintered 8000 base and an Eco-plastic top sheet, the Tweaker is a durable and high-performance modern manifestation of a timeless true twin snowboard shape.

Rider Type:  All-Mountain / Freestyle

Shape: True Twin

Flex: 6/10 - Medium

Rocker: Camber

Ability Level: Advanced / Expert

CAMBER

A traditional full camber profile offers the most edge response and stability possible. The camber radius tapers into the 3D contoured base and releases the edges so you aren't getting hooked up and thrown off, offering a less-catchy feel while still being responsive.

Flex: 6/10 (1=soft, 10=stiff)

Medium flex boards offer good stability at speed and are easy to turn and maneuver.

Twin Flex

This board flexes the same in the nose and tail, allowing you to ride, pop, and press the same in regular and switch.

V-Core 3.0

Boards with V-Cores are slightly softer in the very center of the board for improved maneuverability and stiffer from the inserts through the tip and tail for stability and pop.

SHAPE

Constructed the same tip to tail, this board is designed to provide a consistent performance when riding in both switch and regular. Twin Shape.

BASE

3D Base Contour 3.0

A moderate 3D base contour featuring an even balance of 7mm of bevel in the nose and tail. Spoon makes the base roll through turns instead of landing flat, making your turns smoother and more natural.

CORE 

FSC Classic Core - A full wood premium poplar core that offers great pop, even flex, and reliable durability.

Biax Fibreglass - A dual-direction, dual-layer, stitched fiberglass laminate that provides a fun, forgiving and snappy ride.

Sustainable Flax / Basalt Stringers

New Jones exclusively sustainable stringers made with 100% natural fibers. Composite Flax and Basalt stringers help transfer power to the edges, improve torsional response, and absorb board chatter.

BASE

 Sintered 8000- This new super durable base material is made from Ultra-High Molecular Weight Polyethylene and carbon, making it easily repairable, highly wax absorbent, and super fast.

EXTRA FEATURES

Oversized Recycled Edges - Exactly what it sounds like, enhanced sustainability and added durability.

Eco-Plastic Topsheet - An ultralight chip/scratch-resistant top sheet made from castor beans. Good for your board, good for the environment.

Traction Tech 3.0 - Like a serrated knife cutting through the snow, Traction Tech adds multiple contact points along the edge of the board for enhanced grip and edge hold in all conditions.

Wend Natural Wax - Jones boards are ready to shred straight out of the shop and are factory waxed with Wend natural wax.

Bio Resin - All Jones boards are built with bio-based, renewable epoxy instead of petroleum-based epoxy. The raw materials used to make Bio Resin are co-products or waste products of other plant-based industrial processes. Producing Bio Resin requires 33% less greenhouse gas emissions than conventional epoxy.

Recycled Black ABS - ABS Plastic is one of the necessary evils of snowboard production. Jones improves the sustainability of their snowboards by using only recycled plastic.

Factory Tuned - All Jones snowboards are factory de-tuned at the tip and tail, so you can go riding straight away.

Blunt Tips - A more freestyle-focused shape for reduced swing weight.

Forever Flex -  Jones boards now are finished slightly overbuilt and are broken in using specialized machinery that mimics riding use. This flexes the fibers and epoxy and allows them to settle into their final state, similar to riding the boards for 20 days. This provides a much more accurate flex rating.

SPECS:

A True Twin shape, buttery flex, and True Camber profile give the Tweaker a playful, evenly balanced board feel, but don’t mistake the Tweaker for your average freestyle twin. The Tweaker’s unique double-radius nose and tail profile maximize the running length of the blunted shape and offer amazing float, while the V-core profiling on the Tweaker’s Classic Core makes the flex softer between the feet for nimble maneuverability and stiffer in the tips for supreme stomp-ability. The Tweaker has Traction Tech 2.0 edges for added edge grip riding through rough snow, and the spooned nose and tail edges on the 3D Contour Base 3.0 reduce edge catch and make it easy to butter and boardslide. Finished with a Sintered 8000 base and an Eco-plastic top sheet, the Tweaker is a durable and high-performance modern manifestation of a timeless true twin snowboard shape.

Rider Type:  All-Mountain / Freestyle

Shape: True Twin

Flex: 6/10 - Medium

Rocker: Camber

Ability Level: Advanced / Expert

CAMBER

A traditional full camber profile offers the most edge response and stability possible. The camber radius tapers into the 3D contoured base and releases the edges so you aren't getting hooked up and thrown off, offering a less-catchy feel while still being responsive.

Flex: 6/10 (1=soft, 10=stiff)

Medium flex boards offer good stability at speed and are easy to turn and maneuver.

Twin Flex

This board flexes the same in the nose and tail, allowing you to ride, pop, and press the same in regular and switch.

V-Core 3.0

Boards with V-Cores are slightly softer in the very center of the board for improved maneuverability and stiffer from the inserts through the tip and tail for stability and pop.

SHAPE

Constructed the same tip to tail, this board is designed to provide a consistent performance when riding in both switch and regular. Twin Shape.

BASE

3D Base Contour 3.0

A moderate 3D base contour featuring an even balance of 7mm of bevel in the nose and tail. Spoon makes the base roll through turns instead of landing flat, making your turns smoother and more natural.

CORE 

FSC Classic Core - A full wood premium poplar core that offers great pop, even flex, and reliable durability.

Biax Fibreglass - A dual-direction, dual-layer, stitched fiberglass laminate that provides a fun, forgiving and snappy ride.

Sustainable Flax / Basalt Stringers

New Jones exclusively sustainable stringers made with 100% natural fibers. Composite Flax and Basalt stringers help transfer power to the edges, improve torsional response, and absorb board chatter.

BASE

 Sintered 8000- This new super durable base material is made from Ultra-High Molecular Weight Polyethylene and carbon, making it easily repairable, highly wax absorbent, and super fast.

EXTRA FEATURES

Oversized Recycled Edges - Exactly what it sounds like, enhanced sustainability and added durability.

Eco-Plastic Topsheet - An ultralight chip/scratch-resistant top sheet made from castor beans. Good for your board, good for the environment.

Traction Tech 3.0 - Like a serrated knife cutting through the snow, Traction Tech adds multiple contact points along the edge of the board for enhanced grip and edge hold in all conditions.

Wend Natural Wax - Jones boards are ready to shred straight out of the shop and are factory waxed with Wend natural wax.

Bio Resin - All Jones boards are built with bio-based, renewable epoxy instead of petroleum-based epoxy. The raw materials used to make Bio Resin are co-products or waste products of other plant-based industrial processes. Producing Bio Resin requires 33% less greenhouse gas emissions than conventional epoxy.

Recycled Black ABS - ABS Plastic is one of the necessary evils of snowboard production. Jones improves the sustainability of their snowboards by using only recycled plastic.

Factory Tuned - All Jones snowboards are factory de-tuned at the tip and tail, so you can go riding straight away.

Blunt Tips - A more freestyle-focused shape for reduced swing weight.

Forever Flex -  Jones boards now are finished slightly overbuilt and are broken in using specialized machinery that mimics riding use. This flexes the fibers and epoxy and allows them to settle into their final state, similar to riding the boards for 20 days. This provides a much more accurate flex rating.

SPECS:

The Supercharged Freestyler

The Tweaker Pro is a supercharged true twin featuring a full camber profile that’s built for high-speed terrain park trickery and ripping lines in any terrain.

Rider Type:  All-Mountain / Freestyle

Shape: True Twin

Flex: Med Stiff and Lively

Rocker: Camber

Ability Level: Advanced / Expert

Wide: For boot sizes 

CAMBER

A traditional full camber profile that offers the insane edge response of camber without the usual hang-ups. The camber radius tapers into the beveled 3D Contour Base at the tips which releases the edges where they
like to hook and balances the pop and directional stability of camber with a looser, less-catchy feel.

CORE

Power Core - Triple-density full wood core featuring hardwood bamboo stringers for added pop and durability plus paulownia for weight savings.

Koroyd - Award-winning synthetic core material developed for the aerospace industry. Koroyd is the lightest and dampest core material we’ve ever tested. It absorbs vibrations and adds response at a fraction of the weight of wood which enhances board control and riding confidence

Triax Fibreglass - Multi-axis, stitched fiberglass laminate that offers a precise and responsive ride in any terrain or snow conditions.

Power Basalt Stringers - Sustainable stringer made with 100% natural fibers. Basalt stringers improve torsional response and transfer power from under your feet to the tips of the board to help eliminate nose and tail chatter.

LAMINATES

Carbon/Innegra reinforcement

BASE

Sintered 9900 Base - Premium base material made from Ultra-High Molecular Weight Polyethylene (UHMW-PE) and carbon. Base is highly wax absorbent, easy to repair and wicked fast.

TOPSHEET

Eco-Plastic - Bio-plastic topsheet made from Castor beans. This eco-material is ultralight, chip/scratch resistant and water/ snow repellent (snow sticks less to topsheet).

EDGES

Oversized recycled steel edges for added durability and improved production sustainability.

The Supercharged Freestyler

The Tweaker Pro is a supercharged true twin featuring a full camber profile that’s built for high-speed terrain park trickery and ripping lines in any terrain.

Rider Type:  All-Mountain / Freestyle

Shape: True Twin

Flex: Med Stiff and Lively

Rocker: Camber

Ability Level: Advanced / Expert

CAMBER

A traditional full camber profile that offers the insane edge response of camber without the usual hang-ups. The camber radius tapers into the beveled 3D Contour Base at the tips which releases the edges where they
like to hook and balances the pop and directional stability of camber with a looser, less-catchy feel.

CORE

Power Core - Triple-density full wood core featuring hardwood bamboo stringers for added pop and durability plus paulownia for weight savings.

Koroyd - Award-winning synthetic core material developed for the aerospace industry. Koroyd is the lightest and dampest core material we’ve ever tested. It absorbs vibrations and adds response at a fraction of the weight of wood which enhances board control and riding confidence

Triax Fibreglass - Multi-axis, stitched fiberglass laminate that offers a precise and responsive ride in any terrain or snow conditions.

Power Basalt Stringers - Sustainable stringer made with 100% natural fibers. Basalt stringers improve torsional response and transfer power from under your feet to the tips of the board to help eliminate nose and tail chatter.

LAMINATES

Carbon/Innegra reinforcement

BASE

Sintered 9900 Base - Premium base material made from Ultra-High Molecular Weight Polyethylene (UHMW-PE) and carbon. Base is highly wax absorbent, easy to repair and wicked fast.

TOPSHEET

Eco-Plastic - Bio-plastic topsheet made from Castor beans. This eco-material is ultralight, chip/scratch resistant and water/ snow repellent (snow sticks less to topsheet).

EDGES

Oversized recycled steel edges for added durability and improved production sustainability.

The Mountain Twin is a versatile directional twin designed for playful shredders who want one board that can ride-it-all.

It's built to shred the whole mountain like it's an endless skatepark without sacrificing float in pow or stability for bombing lines. The Twin's shape features blunt tips for reduced swing weight, Traction Tech edges to keep you locked in on firm snow and a 3D Contour Base that makes every turn more effortless. With a mid-stiff twin flex and a CamRock profile the Mountain Twin excels at poppin' pillows and pressin' boxes while it's also an easy board to turn and finesse in tight terrain. To complete the performance package, the Mountain Twin has a super fast and durable Sintered 8000 base and added stance options with the Freestyle/Freeride Stance pack.

Rider Type: All-Mountain / Freestyle

Shape: Directional Twin

Flex: 7/10 Medium - Stiff

Rocker: Rocker / Camber / Rocker

Ability Level:  Intermediate / Advanced

CAMBER

The Mountain Twin is a versatile directional twin designed for playful shredders who want one board that can ride-it-all.

It's built to shred the whole mountain like it's an endless skatepark without sacrificing float in pow or stability for bombing lines. The Twin's shape features blunt tips for reduced swing weight, Traction Tech edges to keep you locked in on firm snow and a 3D Contour Base that makes every turn more effortless. With a mid-stiff twin flex and a CamRock profile the Mountain Twin excels at poppin' pillows and pressin' boxes while it's also an easy board to turn and finesse in tight terrain. To complete the performance package, the Mountain Twin has a super fast and durable Sintered 8000 base and added stance options with the Freestyle/Freeride Stance pack.

Rider Type: All-Mountain / Freestyle

Shape: Directional Twin

Flex: 7/10 Medium - Stiff

Rocker: Rocker / Camber / Rocker

Ability Level:  Intermediate / Advanced

CAMBER

The Mind Expander Twin is a hybrid Surf Series model that blends the playful, easy going board feel of the Mind Expander with the freestyle performance of a directional twin shape. The Mind Expander Twin’s fun-loving personality is defined by it’s friendly flex, tight sidecut, Christenson Surf CAMBER profile and 3D Contour Base 3.0. The blunted, twin shape and 3D Contour Base make riding switch and buttering pow extra easy while the narrow sidecut and Surf Camber profile offer snappy turn response. For a damp ride and confident edge control on chop or ice, the Mind Expander Twin also features Flax/Basalt Stringers and Traction Tech 3.5 edges. Riders who live to bounce down the mountain hitting every terrain feature in sight will love this new alternative freestyle board.

Rider Type:  Freeride / Powder

Shape:  Directional Twin

Flex:  6/10 Medium

Rocker:  Rocker / Camber / Rocker

Ability Level:  Advanced / Expert

CAMBER

Christenson Surf Camber / Rocker – Uprise in the big floaty nose and at the tail end helps to keep you above the soft stuff with easy turn initiation. Camber in the middle provides the power and pop you need for responsive snowboarding.

FLEX

Directional Flex Pattern

Flex Rating – 6 (1 Soft - 10 Stiff)

Forever Flex – All Jones boards are broken in using specialized machinery that mimics extreme riding use to help stabilize the flex and rocker profile of a board for it's lifetime.

SHAPE

3D Contour Base 3.0 – Freeride focused 3D Contour Base featuring a 7mm of spoon bevel in the nose and 0 - 7mm of spoon bevel in the tail. Spoon bevel starts at the rocker point.

Progressive Sidecut – At the far ends of the sidecut, the radius is incrementally increased as the edge reaches the contact point. Gradually increasing the sidecut radius towards the contact point delivers smoother turn initiation and exit as the edge tracks in and out of the snow with a less abrupt transition.

Blunt Nose – "How a board glides in powder, crust, corn or any snow more than an inch deep is dictated by it's front contact point and just past it. Next time you are in soft snow watch how much snow comes over the corner of the nose near the contact point. The billowing snow coming out from behind the tip means you are plowing through it which is obviously slowing you down. By adding a blunt nose you get the float benefits of a much longer nose without the 'snow plow' rounded tip and it's extra swing weight." - Jeremy Jones

CORE

Bamboo Surf Core – Re-designed triple density Bamboo Surf wood core that features primarily paulownia stringers with bamboo stringers positioned in the pocket of the sidecut for better edge response and turn power.

V-Core – Boards with V-Cores are slightly softer in the very center of the board for improved maneuverability and stiffer through the tip and tail for stability and pop.

LAMINATES

Biax Fiberglass – A dual-direction, dual-layer, stitched fiberglass laminate that provides a fun, forgiving and snappy ride.

Sustainable Flax / Basalt Stringers – Jones exclusive sustainable stringer made with 100% natural fibers. Composite Flax and Basalt stringer helps transfer power power to the edges, improves torsional response and absorbs board chatter.

SIDEWALLS

Recycled ABS – ABS plastic is one of the necessary evils of snowboard production. Jones improves the sustainability of their snowboards by using only recycled plastic.

BASE

Sintered 8000 Base – New super durable material made from Ultra High Molecular Weight polyethylene and carbon.

EDGES

Oversized Recycled Edges – All Jones boards are made with oversized recycled steel edges for added durability and improved production sustainability.

Traction Tech 3.5 – Like a serrated knife slicing into the snow, Traction Tech improves your edge grip by adding multiple contact points along the running length of your board.

TOPSHEET

Eco-Plastic Topsheet – Bio-plastic topsheet made from Castor beans. This eco-material is ultralight, chip/scratch resistant and water/snow repellent (snow sticks less to topsheet).

ADDITIONAL FEATURES

Factory Tuned – All Jones snowboards are factory de-tuned at the tip and tail so you can go right from the shop to the mountain.

Wend Natural Wax – Jones boards are ready to shred straight out of the shop and are factory waxed with WEND natural wax.

Bio Resin – All Jones boards are now built with bio-based, renewable epoxy instead of petroleum based epoxy. The raw materials used to make Super Sap Bio-Resin are co-products or waste products of other plant-based industrial processes. Producing Super Sap requires 33% less greenhouse gas emissions than conventional epoxy.

Binding Compatibility - 2 x 4 Insert Pattern

Freeride / Freestyle Pack Inserts – Allows option to center or set back your stance on the sidecut as conditions demand.

 STATS:

The Mind Expander is an alternative all-mountain board that wants to slash every terrain feature in sight. Surf shaper Chris Christenson and Jeremy Jones designed the Mind Expander for the creative rider who draws lines blending freestyle, freeride, and surf styles.

For playful float in pow, the Mind Expander features a Surf Rocker profile, a 3D Contour Base 3.0, and a hybrid directional shape. The blunted nose, full-size tail, and tight sidecut offer the nimble maneuverability of a directional board matched with the freestyle abilities of a directional twin. The Mind Expander also features a Bamboo Surf Core and Basalt Power Stringers for better edge response and Rounded Recycled ABS Sidewalls for improved top sheet durability. For added speed and stance options, the Mind Expander has a Sintered 8000 base and Carve Pack inserts that offer a more centered stance for ripping hardpack.

Rider Type: All-Mountain / Freeride / Powder

Shape: Directional 

Flex: 6/10 Medium

Rocker: Rocker

Ability Level:  Intermediate / Advanced

CAMBER

The new Hovercraft is a modern manifestation of our cult classic alternative freeride shape that features our most advanced 3D shape tech and groundbreaking recycled materials. The Hovercraft’s new shape keeps the floaty nose, compact tail, directional rocker profile and long sidecut that made the original model so nimble and stable, but its been supercharged with 12mm of spoon bevel in the nose for lightning-fast turn initiation and a glide accentuating, speed boosting 3D hull in the tail. The new Hovercraft is also built with recycled materials from old snowboards making it the most responsibly produced board in the Jones line. Now a unisex model with sizes to fit riders of every body type, the one and only Hovercraft is ready to win the hearts of powder slashers and all-mountain rippers the world over once again.

Rider Type:  All Mountain / Freeride / Powder

Shape:  Directional

Flex:  7/10 - Precise

Camber: Rocker / Camber / Rocker

Rider Ability: Advanced / Expert

CAMBER

Featuring a floaty, freeride nose matched with a freestyle tail, the Frontier is ideal for pow days, park days and every day in between. The Frontier’s Directional shape, Directional Rocker profile and Traction Tech 2.0 edges provide confident stability riding through tech terrain or rough snow while the spooned nose+tail edges on the 3D Contour Base 1.0 reduce edge to catch and make it easy to turn in tight terrain. The Frontier offers high performance without skimping on materials as it’s built with a Sintered 8000 base, an Eco-plastic topsheet, and a Classic Core that is specially profiled between the feet for added pop.

Rider Type:  All Mountain / Freestyle / Freeride

Shape:  Directional Twin

Flex:  Medium

CAMBER

Directional Rocker – A hybrid rocker/camber flex pattern defined by more tip rocker then tail rocker and camber between the bindings. The rockered tip floats the board’s nose and improves maneuverability while the camber underfoot provides edge hold and response. A slightly rockered tail maintains the power and stability of a traditional board but helps keep the tail catch-free initiating turns and landing switch.

Flex

Directional Flex Pattern

Flex Rating – 6 (1 Soft - 10 Stiff)

Forever Flex – All Jones boards are broken in using specialized machinery that mimics extreme riding use to help stabilize the flex and rocker profile of a board for it's lifetime.

Shape

3D Base Contour 1.0 – Subtle yet effective 3D-base contours featuring an even balance of 2mm spoon bevel in the nose and 2mm spoon bevel in the tail. Spoon bevel starts just after the rocker point.

Progressive Sidecut – At the far ends of the sidecut, the radius is incrementally increased as the edge reaches the contact point. Gradually increasing the sidecut radius towards the

contact point delivers smoother turn initiation and exit as the edge tracks in and out of the snow with a less abrupt transition.

Blunt Nose – "How a board glides in powder, crust, corn or any snow more than an inch deep is dictated by it's front contact point and just past it. Next time you are in soft snow watch how much snow comes over the corner of the nose near the contact point. The billowing snow coming out from behind the tip means you are plowing through it which is obviously slowing you down. By adding a blunt nose you get the float benefits of a much longer nose without the 'snow plow' rounded tip and it's extra swing weight." - Jeremy Jones

Core

FSC™ Classic Core – Full wood premium poplar core that offers fun pop, even flex and solid durability.

V-Core – Boards with V-Cores are slightly softer in the very center of the board for improved manouverability and stiffer through the tip and tail for stability and pop.

Laminates

Biax Fiberglass – A dual-direction, dual-layer, stitched fiberglass laminate that provides a fun, forgiving and snappy ride.

Sidewalls

Recycled ABS – ABS plastic is one of the necessary evils of snowboard production. Jones improves the sustainability of their snowboards by using only recycled plastic

Base

Sintered 8000 Base – New super durable material made from Ultra High Molecular Weight polyethylene and carbon.

Flip Flop Base – Flip-Flop bases improve board sustainability by reducing p-tex waste.

Edges

Traction Tech 2.0 – Like a serrated knife slicing into the snow, Traction Tech improves your edge grip by adding multiple contact points along the running length of your board.

Oversized Recycled Edges – All Jones boards are made with oversized recycled steel edges for added durability and improved production sustainability.

Topsheet

Eco-Plastic Topsheet – Bio-plastic topsheet made from Castor beans. This eco-material is ultralight, chip/scratch resistant and water/snow repellent (snow sticks less to topsheet).

Additional Features

Bio Resin – All Jones boards are now built with bio-based, renewable epoxy instead of petroleum based epoxy. The raw materials used to make Super Sap Bio-Resin are co-products or waste products of other plant-based industrial processes. Producing Super Sap requires 33% less greenhouse gas emissions than conventional epoxy.

Factory Tuned – All Jones snowboards are factory de-tuned at the tip and tail so you can go right from the shop to the mountain.

Wend Natural Wax – Jones boards are ready to shred straight out of the shop and are factory waxed with WEND natural wax.

Binding Compatibility

2 x 4 Insert Pattern

 SPECS:

Featuring a floaty, freeride nose matched with a freestyle tail, the Frontier is ideal for pow days, park days and every day in between. The Frontier’s Directional shape, Directional Rocker profile and Traction Tech 2.0 edges provide confident stability riding through tech terrain or rough snow while the spooned nose+tail edges on the 3D Contour Base 1.0 reduce edge to catch and make it easy to turn in tight terrain. The Frontier offers high performance without skimping on materials as it’s built with a Sintered 8000 base, an Eco-plastic topsheet, and a Classic Core that is specially profiled between the feet for added pop.

Rider Type:  All Mountain / Freestyle / Freeride

Shape:  Directional Twin

Flex:  Medium

CAMBER

Directional Rocker – A hybrid rocker/camber flex pattern defined by more tip rocker then tail rocker and camber between the bindings. The rockered tip floats the board’s nose and improves maneuverability while the camber underfoot provides edge hold and response. A slightly rockered tail maintains the power and stability of a traditional board but helps keep the tail catch-free initiating turns and landing switch.

Flex: Directional Flex Pattern

Flex Rating – 6 (1 Soft - 10 Stiff)

Forever Flex – All Jones boards are broken in using specialized machinery that mimics extreme riding use to help stabilize the flex and rocker profile of a board for it's lifetime.

SHAPE

3D Base Contour 1.0 – Subtle yet effective 3D-base contours featuring an even balance of 2mm spoon bevel in the nose and 2mm spoon bevel in the tail. Spoon bevel starts just after the rocker point.

Progressive Sidecut – At the far ends of the sidecut, the radius is incrementally increased as the edge reaches the contact point. Gradually increasing the sidecut radius towards the

contact point delivers smoother turn initiation and exit as the edge tracks in and out of the snow with a less abrupt transition.

Blunt Nose – "How a board glides in powder, crust, corn or any snow more than an inch deep is dictated by it's front contact point and just past it. Next time you are in soft snow watch how much snow comes over the corner of the nose near the contact point. The billowing snow coming out from behind the tip means you are plowing through it which is obviously slowing you down. By adding a blunt nose you get the float benefits of a much longer nose without the 'snow plow' rounded tip and it's extra swing weight." - Jeremy Jones

CORE

FSC™ Classic Core – Full wood premium poplar core that offers fun pop, even flex and solid durability.

V-Core – Boards with V-Cores are slightly softer in the very center of the board for improved manouverability and stiffer through the tip and tail for stability and pop.

Laminates

Biax Fiberglass – A dual-direction, dual-layer, stitched fiberglass laminate that provides a fun, forgiving and snappy ride.

SIDEWALLS

Recycled ABS – ABS plastic is one of the necessary evils of snowboard production. Jones improves the sustainability of their snowboards by using only recycled plastic.

BASE

Sintered 8000 Base – New super durable material made from Ultra High Molecular Weight polyethylene and carbon.

Flip Flop Base – Flip-Flop bases improve board sustainability by reducing p-tex waste.

EDGES

Traction Tech 2.0 – Like a serrated knife slicing into the snow, Traction Tech improves your edge grip by adding multiple contact points along the running length of your board.

Oversized Recycled Edges – All Jones boards are made with oversized recycled steel edges for added durability and improved production sustainability.

TOPSHEET

Eco-Plastic Topsheet – Bio-plastic topsheet made from Castor beans. This eco-material is ultralight, chip/scratch resistant and water/snow repellent (snow sticks less to topsheet).

ADDITIONAL FEATURES

Bio Resin – All Jones boards are now built with bio-based, renewable epoxy instead of petroleum based epoxy. The raw materials used to make Super Sap Bio-Resin are co-products or waste products of other plant-based industrial processes. Producing Super Sap requires 33% less greenhouse gas emissions than conventional epoxy.

Factory Tuned – All Jones snowboards are factory de-tuned at the tip and tail so you can go right from the shop to the mountain.

Wend Natural Wax – Jones boards are ready to shred straight out of the shop and are factory waxed with WEND natural wax.

Binding Compatibility: 2 x 4 Insert Pattern

SPECS:

The Playful All-Mountin Carver - Ideal for carving tight turns and all-mountain slashing.

The new Freecarver 6000s is a directional freeride board designed to help you carve up the mountain with precision and style. Featuring a medium flex, full camber profile, and a tapered directional shape the Freecarver 6000s blends design elements from race, boardercross, and freeride boards into a snappy, high-performance ride that excels at carving tight turns. The Freecarver 6000s has a short, six-meter sidecut radius and a long effective edge. This is a board that you can lean into and rip short radius turns like you were strapped into a merry-go-round. The Freecarver 6000s is built with an Ash veneer topsheet and Biax fiberglass that suck up chatter, a 3D Contour Base 2.0 that improves turn initiation, and a hyper-fast and durable Sintered 9000 base. 

Rider Type:  All-Mountain / Carving

Shape: Directional

Flex: 7/10 - Stiffish

Rocker: True Camber

Ability Level: Advanced / Expert

True Camber

A traditional full camber profile that offers the insane edge response of camber without the usual hang-ups. The camber radius tapers into the beveled 3D Contour Base at the tips which releases the edges where they like to hook and balances the pop and directional stability of camber with a looser, less-catchy feel.

3D Contour Base 2.0

Moderate 3D Contour Base featuring an even balance of 4mm spoon bevel in the nose and 4mm spoon bevel in the tail. Spoon bevel starts at the rocker point.

Power Core

Triple-density full wood core featuring hardwood bamboo stringers for added pop and durability plus paulownia for weight savings.

Sintered 9000 base

Premium base material made from Ultra-High Molecular Weight Polyethylene (UHMW-PE) and carbon. Base is highly wax absorbent, easy to repair and wicked fast.

Blunt Nose

“How a board glides in powder, crust, corn or any snow more than an inch deep, is dictated by it’s front contact point and just past it. Next time you are in soft snow watch how much snow comes over the corner of the nose near the contact point. The billowing snow coming out from behind the tip means you are plowing through it which is obviously slowing you down. By adding a blunt nose you get the float benefits of a much longer nose without the ‘snow plow’ rounded tip and it’s extra swing weight.” - Jeremy Jones

Ash Wood Topsheet

Thin ash wood veneer layer that functions as both a protective topsheet and a global reinforcement layer. The thin wood stringers that make up the topsheet provide even flex and suck up chatter from uneven snow conditions.

Basalt Power Stringers

Sustainable stringer made with 100% natural fibers. Basalt stringers improve torsional response and transfer power from under your feet to the tips of the board to help eliminate nose and tail chatter.

Biax Fiberglass

A dual-direction, dual-layer, stitched fiberglass laminate that provides a fun, forgiving and snappy ride.

Oversizes recycled edges

Oversized recycled steel edges for added durability and improved production sustainability.

Factory Tuned Forever Flex

All Jones Snowboards are factory de-tuned at the tip and tail so you can go right from the shop to the mountain

SPECS:

It’s the perfect everyday, any day board as it charges in pow or on piste, yet it’s soft enough to be playful in any terrain. The Dream Weaver’s Directional shape, Directional Rocker profile and Traction Tech 2.0 edges provide stability riding through rough snow while the spooned nose and tail edges on the 3D Contour Base 1.0 reduce edge catch and make it easy to turn in tight terrain. The Dream Weaver offers high performance without skimping on materials as it’s built with a super fast and durable Sintered 8000 base, an Eco-plastic topsheet and a Classic Core that is specially profiled between the feet for added pop.

Rider Type:  All Mountain / Freeride

Shape:  Directional

Flex:  Medium

Rocker:  Rocker / Camber / Rocker

Ability Level:  Intermediate / Advanced

CAMBER

Directional Rocker – A hybrid rocker/camber flex pattern defined by more tip rocker then tail rocker and camber between the bindings. The rockered tip floats the board’s nose and improves maneuverability while the camber underfoot provides edge hold and response. A slightly rockered tail maintains the power and stability of a traditional board but helps keep the tail catch-free initiating turns and landing switch.

FLEX

Directional Flex Pattern

Flex Rating – 6 (1 Soft - 10 Stiff)

Forever Flex – All Jones boards are broken in using specialized machinery that mimics extreme riding use to help stabilize the flex and rocker profile of a board for it's lifetime.

SHAPE

3D Base Contour 1.0 – Subtle yet effective 3D-base contours featuring an even balance of 2mm spoon bevel in the nose and 2mm spoon bevel in the tail. Spoon bevel starts just after the rocker point.

Progressive Sidecut – At the far ends of the sidecut, the radius is incrementally increased as the edge reaches the contact point. Gradually increasing the sidecut radius towards the contact point delivers smoother turn initiation and exit as the edge tracks in and out of the snow with a less abrupt transition.

Blunt Nose – "How a board glides in powder, crust, corn or any snow more than an inch deep is dictated by it's front contact point and just past it. Next time you are in soft snow watch how much snow comes over the corner of the nose near the contact point. The billowing snow coming out from behind the tip means you are plowing through it which is obviously slowing you down. By adding a blunt nose you get the float benefits of a much longer nose without the 'snow plow' rounded tip and it's extra swing weight." - Jeremy Jones

CORE

FSC™ Classic Core – Full wood premium poplar core that offers fun pop, even flex and solid durability.

V-Core – Boards with V-Cores are slightly softer in the very center of the board for improved manouverability and stiffer through the tip and tail for stability and pop.

LAMINATES

Biax Fiberglass – A dual-direction, dual-layer, stitched fiberglass laminate that provides a fun, forgiving and snappy ride.

SIDEWALLS

Recycled ABS – ABS plastic is one of the necessary evils of snowboard production. Jones improves the sustainability of their snowboards by using only recycled plastic.

BASE

Sintered 8000 Base – New super durable material made from Ultra High Molecular Weight polyethylene and carbon.

Flip Flop Base – Flip-Flop bases improve board sustainability by reducing p-tex waste.

EDGES

Oversized Recycled Edges – All Jones boards are made with oversized recycled steel edges for added durability and improved production sustainability.

Traction Tech 2.0 – Like a serrated knife slicing into the snow, Traction Tech improves your edge grip by adding multiple contact points along the running length of your board.

TOPSHEET

Eco-Plastic Topsheet – Bio-plastic topsheet made from Castor beans. This eco-material is ultralight, chip/scratch resistant and water/snow repellent (snow sticks less to topsheet).

Additional Features

Bio Resin – All Jones boards are now built with bio-based, renewable epoxy instead of petroleum based epoxy. The raw materials used to make Super Sap Bio-Resin are co-products or waste products of other plant-based industrial processes. Producing Super Sap requires 33% less greenhouse gas emissions than conventional epoxy.

Factory Tuned – All Jones snowboards are factory de-tuned at the tip and tail so you can go right from the shop to the mountain.

Wend Natural Wax – Jones boards are ready to shred straight out of the shop and are factory waxed with WEND natural wax.

Binding Compatibility : 2 x 4 Insert Pattern

SPECS:

The Aviator 2.0 is a hard charging directional twin built for expert all-mountain riders who like to rail turns and stomp airs anywhere on the mountain. This Aviator was designed in collaboration with Jones team riders Victor de la Rue and Jimmy Goodman. What sets the Aviator apart is its FULL CAMBER profile. Victor and Jimmy swear by the power of full camber for edging on steeps and landing tricks on the tail. The Aviator also features a 3D Contour Base 2.0, Triax Fiberglass, Carbon/ Innegra Reinforcement, an ECO-Plastic top sheet and Traction Tech 3.5 edges. The 3D Contour Base starts after the contact point and helps eliminate edge catch and improve turn fluidity while the Triax fiberglass and Carbon Innegra layer under the
Eco-Plastic top sheet offers supreme pop and lightning-fast response. The Aviator’s Power Core includes a section of ultralight Koroyd in the nose absorbs chatter at a fraction of the weight of wood.

Rider Type: All-Mountain / Freestyle

Shape: Directional Twin

Flex: Stiff  8/10

Rocker: Camber

Ability Level:  Advanced / Expert

NEW SIZE 157W

The Aviator 2.0 is a hard charging directional twin built for expert all-mountain riders who like to rail turns and stomp airs anywhere on the mountain. This Aviator was designed in collaboration with Jones team riders Victor de la Rue and Jimmy Goodman. What sets the Aviator apart is its FULL CAMBER profile. Victor and Jimmy swear by the power of full camber for edging on steeps and landing tricks on the tail. The Aviator also features a 3D Contour Base 2.0, Triax Fiberglass, Carbon/ Innegra Reinforcement, an ECO-Plastic top sheet and Traction Tech 3.5 edges. The 3D Contour Base starts after the contact point and helps eliminate edge catch and improve turn fluidity while the Triax fiberglass and Carbon Innegra layer under the
Eco-Plastic top sheet offers supreme pop and lightning-fast response. The Aviator’s Power Core includes a section of ultralight Koroyd in the nose absorbs chatter at a fraction of the weight of wood.

Rider Type: All-Mountain / Freestyle

Shape: Directional Twin

Flex: Stiff  8/10

Rocker: Camber

Ability Level:  Advanced / Expert