BaseNZ Easter Snow Sale

Medium-Stiff Flex – Helps with quick, technical maneuvers, even at high speeds. Great for all-mountain carving, powerful freeriding and charging through the terrain park.

Re:Flex™ Binding System – Offers more flex, feel, and cushioning than traditional disc bindings, in a package that's universally compatible with all current mounting systems, including 4x4, 3D® (via Burton Rider Service), and the Channel®. The minimized, cored base-plate with Living Hinge™ disc reduces the weight and footprint of the binding, while also bending freely for a more natural flex.

Single Component 30% Short-Glass / Nylon Composite Baseplate – More responsive yet playful. One material throughout creates consistent response and feel for all-terrain domination.

Re:Flex™ FullBED Cushioning System – Offers full underfoot cushioning that maximizes comfort while minimizing fatigue. Anchored to the baseplate, the stealth trap door design makes it easy to access the mounting hardware.

B3 Gel – The same cushioning found in Burton's high-end boots for ultimate dampening that's formulated to withstand repeated impacts without breaking down or hardening up in cold temps.

Single Component Construction – The simplicity of a one-piece hi-back means immediate response. Using Burton's book of material secrets, they can manipulate the overall flex profile -- from buttery to responsive.

Zero-Lean Canted Hi-Back Design – Your legs don't go straight up, and neither should your hi-backs. This ergonomic design follows the natural contours of your left and right legs to maximize control and comfort. Riders who prefer a more playful and relaxed feel will dig the Zero Forward Lean design on select hi‑backs. As always, you can still choose to crank ‘em forward for quicker control when carving or climbing icy pipe walls.

Heel Hammock – A reinforced rubbery material wraps response around the heel of any boot. Run your straps a little looser and still get lightening fast response out of turns with your heel cradled in complete suspension.

DialFLAD™ – The higher the Forward Lean angle on your hi-backs, the quicker your heel-edge turns. Crank ’em forward for icy hits in the pipe, or back ’em off for jibbing.

Asym Hammockstrap™ – Featuring the same minimal and seamlessly comfortable design as the Hammockstrap, this asymmetrical pad and spine shape wraps the boot in response. Flip the straps for increased freedom, or run stock for power and support.

Supergrip Capstrap™ 2.0 – Minimalist design merges two materials into one technologically advanced toe strap. A firmer material in the spine provides a supportive and lightweight skeleton, while a softer over-molded material improves boot wrap and comfort. Featuring Ultra-minimized and fully injected with an over-molded design. Made ultra-durable, glue-less, stitch-less and PU-free construction. 3D curved with a triple axis spine as well as a true wrap toe window.

Flex Slider – Makes strapping-in a breeze with a strategically stretched hinging zone that allows the heel strap to flex and fall fully open. Thanks to science of forced molecular alignment, the Flex Slider is also incredibly strong.

Double Take Buckles with Insta-Click – Be the first to drop in with the rapid ratcheting of Burton's Double Take Buckles. Helical teeth and "Insta-Click" engagement combine for increased torque per crank, faster uptake, and fewer cranks to tighten. The result: vastly improved strength, speed and ease of use.

Compatible with All Major Mounting Systems – Please note, the 3D Hinge Disc is required for mounting on 3D systems (not included).

Re-Ground Materials to Reduce Waste

ShadowFit Baseplate – 3-piece baseplate featuring a unique flexible heel loop and completely anatomical fit to provide intuitive mobility without sacrificing performance. The result is an ultra light binding that allows your whole kit to flex together.

Kevlar Quickwire – For maximum support and quick transmission of any movement.

Carbon-lite – 30% carbon fiber charged for enhanced strength, rigidity and energy transfer.

Adjustable Toe Ramp – Super easy to handle adjustability for the best possible transmission on toe edge.

Integrated Mounting System – Integrated Mounting System (IMS) is Salomon’s patented trick for keeping your disc screws in place while adjusting your bindings or swapping out boards.

Power Hook – This direct link between Kevlar Quickwire and baseplate maximizes the transmission on heelside turns.

Optivibe Basepad – Lightweight, soft, and high-dampening. VIBE adds comfort and cushioning in the high-impact zones and reduces vibrations on any terrain..

Universal Disc – Ultimate compatibility with all existing mounting systems on the market.

Unite Disc Compatbility – The baseplate is compatible with Salomon's UNITE rental system.

Quantum Highback – Asymmetrical highback featuring a full unidirectional carbon construction. Its ergonomic design provides the ultimate in transmission and comfort.

Shadow Lite Ankle Straps – Ultimate fit, precision and lightness for all terrain performance.

Locked-up Toe Strap – Ultimate envelopment for perfect boot hold. Ultra lightweight and durable.

Micro Max Strap Adjustments – Fast and precise micro adjustments let you optimize the straps centering on your boot for maximum comfort and support.

Aluminum Buckles – Providing the best of lightweight and quick and powerful cranking with a buttery release. Deep bite allowing a secure lock and smooth adjustment.

MP Ratchets – Highest performing and quality ratchet found on all Shadow Fit bindings. Better tightening, less ladder damage, more power and precision with each click.

Canted Footbeds – Instantly add pop power and extra edge control to your riding with 2.5° canted footbeds. Easy on the knees and no loss of board-feel.

Paulownia Wood Core – The paulownia wood core reduces the ski's weight by up to 30% for improved agility and handling while retaining control.

Extended Core – The Extended Core construction increases ski-snow contact and the torsional stability of the ski, boosting precision and control in varied snow conditions.

Air Tip – The Air Tip lightens the tip and tail of the ski for improved maneuverability and turn control in all snow conditions.

LAMINATES

EST All Mountain Rocker – Rocker is paired with tapered sidecuts both tip and tail provide floatation in soft snow as well as forgiveness in turn shape. Camber underfoot maintains edge hold on the hardpack.

Caruba Core – Armada's lightest wood species keeps the overall weight low while retaining the power and dampness you want while skiing.

Articulated Titanal Banding – Titanal adds horsepower and strength, while an Elastic Compound Layer allows the ski to enter the turn with ease, compressing and releasing more energy than a traditional TI layer.

AR100 Sidewall – Superior edge grip for precision on the hardest of snow surfaces.

Comp Series Base – Sintered UHMW polyethylene with added carbon aids in speed and durability

2.1 All Mountain Edge

We recommend a brake width equal to or at most 15 mm wider than the ski waist width. This ski would be perfect for a 100mm brake width