Ski and Snowboard Boots

Step Into Mid-Flexing Freestyle Fun

Just step on and ride. For riders with a freestyle bias who spend their days chasing down side hits and natural features across the mountain, the men's Burton Swath Step On® Snowboard Boots make for quick transitions on and off the lift. Their lightweight build keeps you light on your feet, while effortless tensioning lets you fine tune the feel from top to bottom to match your ambitions. The simplicity of Step On binding compatibility is like the icing on the cake.

• Just Step Right In

  The Step On® system creates a clean and simple boot-to-binding interface that lets you step right in. No buckles. No Straps. No Fuss.

• Responsive, Medium-Stiff Feel

  A not too stiff, no too soft flex means you can push your skills without being pushed around.

• Micro-Adjustable Fit

  A Dual-Zone BOA® Fit System lets you independently micro-adjust the fit and feel of the upper and lower boot for the just the right fit and feel.

• Lightweight Feel

  Ultraweave shell material eliminates bulky seams, creating a lightweight, durable, and seamless shell.

THE TECH:

Lacing - Dual Zone Boa®

Liner - Imprint™ 3 Liner

Inner Cuff - Focus Cuff

Outsole - Step On™ Outsole / Burton Recycled Content Rubber

Warmth Features - Sleeping Bag Reflective Foil

Warranty - 1-Year Warranty

Just Step On and Charge as Hard You Like

Explore. Experiment. Charge. Locked-and-loaded power meets Step On® convenience in the men's Burton Photon Step On® Snowboard Boots. A precision fit and responsive feel encourages you to push your riding further. From the ease of Step On® to the support you need to charge at any level, the Photon has your back when it's time to do more on your board. It's a boot with few limits, right down to its fit and comfort that are made for riders who like to push for the edge.

• Just Step Right In

  The Step On® system creates a clean and simple boot-to-binding interface that lets you step right in. No buckles. No Straps. No Fuss.

• Supportive and Responsive

  Plenty of support and responsive feel give you that extra edge to go for it.

• Micro-Adjustable, Uniform Fit

  The Sequence BOA® Fit System has two distinct lace paths for a uniform fit and secure heel hold with the twist of a single dial.

• Warm, Dry Feet

  Lightweight, heat-moldable liners offer a custom fit with the tech to reflect heat and wick sweat to keep your feet warm and dry all day, all season.

• Made for Wide Feet

  This edition is for riders who prefer a little extra width in the forefoot.

THE TECH:

Lacing - Sequence Boa®

Liner - Imprint™ 3 Liner

Inner Cuff - Focus Cuff

Outsole - Vibram Traction Lug

Vibram® EcoStep - Warmth Features / Sleeping Bag Reflective Foil 

Wide Fit - Yes

Warranty - 1-Year Warranty

Step On® Convenience. Ion Performance.

The men's Burton Ion Step On® Snowboard Boots combine the legendary fit and flex of the Ion boot with the intuitive ease of Step On®. The Ion's firm flex supports full-speed-ahead charging. Speedzone lacing and a BOA® adjustable snugger strap provide secure foot hold. Add out-of-the-box comfort, and we're talking about a true step on and go program for riders who like to rip.

• Firm, Supportive Flex

  It's full-speed-ahead with this boot's firm flex.

• Extra Hold Down

  A BOA® adjustable snugger strap complements Speedzone lacing for extra hold down with the quick turn of a dial.

• Just Step Right In

  The Step On® system creates a clean and simple boot-to-binding interface that lets you step right in. No buckles. No Straps. No Fuss.

THE TECH:

Lacing - Speed Zone™

Liner - Life Liner

Inner Cuff - Tuff Cuff Lite

Outsole - Vibram Traction Lug / Vibram® EcoStep

Warmth Features - DRYRIDE Heat Cycle™ Lining / Sleeping Bag Reflective Foil

Warranty - 1-Year Warranty

The FL3X Diverge SC was meticulously designed to meet the needs of Sammy Carlson’s unique style. Whether Sammy’s boosting backcountry kickers, hopping on the sled, or preparing to drop into a technical line, the Diverge SC delivers. Equipped with an Intuition Pro Tour Wrap, removable 120 Flex Tongue, and lightweight Diverge Tour 3-Piece Shell. The Diverge SC is the tool you’ve been looking for.

BEST FOR: Freestyle / Park / Piste / Powder / Touring - The do it all!

FLEX: 7/10 120

LAST WIDTH: 102mm

K2 - New FL3X collection replaces Full Tilt boots for 2023

LINER

Slip-on the Intuition Pro Tour Wrap and get ready to motor on up the skin track. Crafted out of Intuition® Foam, and featuring a tour notch and lace-up system, the Intuition Pro Tour Wrap offers the added comfort and performance your boot is missing.

J-Bar – An additional J-shaped piece of foam is inserted internally on both sides of the ankle area to dramatically increase ankle hold and keep your feet perfectly in place for precise control.

SHELL

OTHER FEATURES

FULLY HEAT MOLDABLE - Both the boot's shell and cuff are capable of being heat-molded to a variety of foot shapes for a true custom fit.

WALK MODE – Flip the lever up to ascend with ease. And when it’s time to send it, flip the lever down, lock t

TOUR HOOK – Keep your buckles in place without impinging upon the full cuff rotation.

VELCRO POWER STRAP

SHOCK ABSORBER BOOT BOARD - Soft rubber in the sole of the shell absorbs vibrations, impact, and shock for a smooth ride.

TECH FITTINGS – Compatible with all pin-tech bindings, the in-molded tech fittings open up a new world of possibilities for FL3X Boots. One boot – any objective.

GRIPWALK – Removable and interchangeable ISO 23223 alpine rockered soles collaboratively designed to work with Marker’s Grip Walk binding system for better grip and added comfort when walking and standing in boots, but doesn’t compromise the power transmission and release function between the boot and binding when skiing. Preinstalled.

Built to withstand your longest, toughest adventures. The Dispatch LT weighs in at 1465g, has a solid 120 flex rating, walk mode boasting 60-degree range of motion, and Tourfit LT liner.

Rest easy knowing that your feet are no longer something you’ll need to worry about with the all new Dispatch LT.

If you are a heavy-hitting big mountain skier looking for a boot that will be up for anything then this could be for you. Handling anything from big GS turns on the groomers to out-of-bounds big mountain sessions. All the tech without compromising on weight, and full throttle charging capabilities.BEST FOR: Freeskiing / Big Mountain / Powder / Touring

FLEX: 8/10 130

LAST WIDTH:  98mm

LINER

POWERFIT PRO TOUR LINER - Pre-molded and lasted with Ultralon heat-moldable foam. Featuring stiffer foam and a stiff, asymmetric tongue for added power and energy transmission, pre-molded ankle pockets, and a high-density power collar. Includes a tour notch at the back of the ankle for increased comfort and range of motion while hiking and skinning.

SHELL

POWERLITE - K2's highest-performance shell design, utilizing shell walls of varying thicknesses and four different types of TPU to provide the ultimate combination of lightweight and responsiveness.

INSTEP

FASTFIT - Softer TPU material is used in the instep area of select models' shells for quick and easy entry and exit.

OTHER FEATURES

ENERGY INTERLOCK - A rivet-free technology that integrates the cuff and shell, putting less stress on the boot’s material and producing a smoother, progressive flex.

POWERLOCK SPINE - A performance-oriented walk mode designed for ski touring that offers a 50-degree range of motion. When in ski mode, Powerlock Spyne provides a powerful and secure connection for uncompromised downhill performance.

FULLY HEAT MOLDABLE - Both the boot's shell and cuff are capable of being heat-molded to a variety of foot shapes for a true custom fit.

PEBAX BIO-RESIN - Lightweight, eco-friendly material for energetic and consistent flex across a wide range of temperatures.

GRIP WALK - Removable and interchangeable ISO 23223 alpine rockered soles collaboratively designed to work with Marker’s Grip Walk binding system for better grip and added comfort when walking and standing in boots, but doesn’t compromise the power transmission and release function between the boot and binding when skiing. Preinstalled.

INTEGRATED TECH FITTINGS - Tech fittings in the toe and heel are fully integrated into the shell injection, allowing for compatibility with both tech bindings and alpine DIN bindings.

FRICTION-FREE CUFF PIVOT - An easy-hinging cuff pivot designed to provide minimal resistance while in walk mode.

Buckle up for high performance with the comfort to match. The Rossignol Hi-Speed Elite 120 LV ski boots pair cutting-edge shell design with a customizable fit for skiers who prefer a low-volume fit. Using generative design, we've engineered the boot shell and cuff for maximum energy transfer and high-speed control through every turn. Adjustable flex, forward lean and canting let you personalize the feel and response to match your skiing. Our preshaped liner feels great right out of the box with a fully thermoformable design that lets you customize the fit. Details like a seamless toe box and Thinsulate™ insulation enhance liner warmth, so you can focus on your skiing. Buckle into the Elite 120 for comfort that matches performance.

ABILITY: Advanced / Expert

FLEX: Stiff

LAST: 98

Low Volume Fit
Low Volume Fit features a 98mm last for a close-fitting, race-inspired fit that's optimized for comfort, precision and power

Lightweight, Full Power
Data-driven Generative Design minimizes boot wall thickness for the most effective use of material to reduce weight and enhance power transfer

Better Skiability, Better Fit
Dual Core technology provides targeted power transmission and shell wrapping, resulting in livelier rebound, response and control

Optimized Rebound and Response
Asymmetric Dual Core Cuff combines softer plastic to wrap the lower leg with harder plastic where needed for support and power transmission for optimized performance and fit

Adjustable Flex
A simple rear spine adjustment provides an adjustable flex range of +5 to -5 for customized power, performance and comfort

Adjustable Forward Lean
An adjustable spoiler on the cuff allows for two degrees of forward lean adjustment between 10.6 and 12.6 degrees

Snug, Accurate, Precision Fit
Preshaped anatomic liner is shaped around the ankle bone for a snug, accurate fit that feels great right out of the box

Optimized Fit and Warmth
Our Seamless Toe Box eliminates pressure points for optimized out-of-the-box fit and reduces heat loss by 20%

Insulated Warmth
Thinsulate™ Platinum keeps feet warm in damp and cold conditions for all-day comfort with advanced odor control

All-Terrain Grip
Premounted GRIPWALK® soles feature a rubber tread and rockered toe for a more natural walking motion and increased traction

Buckle in for all-day carving comfort. The Speed 120 HV+ GW providing customizable power and precision in a forgiving 104mm last to suit a variety of foot shapes. The shell is engineered for reduced weight and full power transfer with an adjustable flex to fine-tune your skiing. The liner is designed to match the natural shape of your foot and is thermo-moldable for a custom fit. An easy entry design lets you slide into the boot with ease.

FLEX: Very Responsive

ABILITY: Advanced / Expert

LAST: 104mm

Relaxed Fit
Relaxed Fit features a 104mm last with wider forefoot, toe box, and ankle areas for generous all-day comfort and support

Reduced Weight, Full Power
Engineered Sensor Matrix shell design reduces boot weight and delivers direct-to-ski power transfer

Adjustable Flex
A simple rear spine adjustment provides a larger flex range for customized power, performance, and comfort

Easy Entry
Softer plastic around the instep allows for easier opening of the boot overlap for smooth entry and exit

Custom Comfort and Precision
Full custom liners are 100% customizable for enhanced comfort, precision, and power transmission

Insulated Warmth and Support
Thinsulate™ Stretch insulates while providing enhanced foot support for better skiability

All-Terrain Grip
Premounted GRIPWALK® soles feature a rubber tread and rockered toe for a more natural walking motion and increased traction.

Back bowl powder laps or beyond the gates, the Alltrack Jr 80 is designed for young skiers looking to explore the whole mountain. The releasable cuff offers a natural range of motion for hiking, while the Generative Design Grid shell is engineered for reduced weight and full power transmission to handle all conditions. The 100mm last and custom liner offer a comfortable fit for exploring the whole mountain.

ABILITY: Advanced / Expert

FLEX: Medium

LAST: 100

Medium Fit
Medium fit features a 100mm last for a precise, comfortable fit that balances comfort and control

Lightweight, Full Power
Generative Design Grid minimizes boot wall thickness for the most effective use of material to reduce weight and enhance power transfer

Optimized Hike Mode
The lower boot shell is designed to offer a 50-degree range of motion in walk mode for efficient touring and maximum power for skiing when in ski mode

Custom Comfort
Custom liners offer internal customization for enhanced comfort and support

GRIPWALK® Compatible (sold separately)
GRIPWALK® soles feature a rubber tread and rockered toe for a more natural walking motion and increased traction

Just Step On and Charge as Hard You Like

Explore. Experiment. Charge. Locked and loaded power meets Step On® convenience in the men's Burton Photon Step On® Snowboard Boots. A precision fit and responsive feel encourage you to push your riding further. From the ease of Step On® to the support you need to charge at any level, the Photon has your back when it's time to do more on your board. It's a boot with few limits, right down to its fit and comfort that are made for riders who like to push for the edge.

FLEX: Medium

RIDER: Advanced / Expert

FIT

LINER

Locked and Loaded Power

Charge harder. Explore more. Stomp every move. The men's Burton Photon BOA® Snowboard Boots let you dial in a precision fit for a responsive feel that encourages you to push your riding. From hike-friendly outsoles for better footing on the boot pack to our most complete cushioning and comfort for enhanced feel and control, the Photon has your back when it's time to do more on your board. It's a boot with few limits, right down to its fit and secure foot lock down that are made for riders who like to push for the edge.

RIDER: Advanced / Expert

FLEX: Medium

FIT

1:1 Firm Flex PowerUP Tongue – Burton offers 1:1 lasting on every boot. It means every half and full size shell, tongue, and out sole offer a precise fit that is not as common as one would think. Drop your loot on a Burton boot and you won't be stuck with the slop of a mismatched shell and liner. PowerUP tongues feature additional dual-density material for rebound and durability.

LINER

LACING

Dual Zone Boa® System with Coiler™ and Lockdown Technologies – Powered by Burton Exclusive New England Ropes with the Boa Guarantee

SOLE

Season after season, this team favorite squashes everything in sight with plush precision and responsive control right out of the box.

Setting the bar higher in every discipline is still the headline for the men's Burton Ion Snowboard Boots. Legendary sums them up and makes them an easy choice for riders who hit the entire mountain. Out-of-the-box comfort promotes a relaxed and natural stance with unmatched control for any terrain. Warm, dry, and comfortable feet are a given with heat-moldable liners that reflect heat, manage sweat, and enhance the boot's overall responsive feel.

RIDER: Advanced / Expert

FLEX: Stiff

FIT

LACING

SOLE

The FL3X Revolve W is best ski boot for any female looking to improve their stunt game, whether that be in the park, moguls or aerials. The Revolve W features a Fully Heat Moldable Revolve Shell, 90 Flex Tongue, and an easy-entry Intuition Tongue Liner.

FLEX: 4/10

LAST: 98mm

SKIER TYPE: Advanced / Expert

LINER

Intiutuin Tongue Liner: The Intuition Tongue Liner’s laminates use multi-layered construction in a traditional tongue liner, designed to provide targeted comfort and performance in a familiar way.

SHELL

Revolver Shell: Revolve Shell, offers the same fit and feel as the Raichle boots of years past, updated to withstand the rigors of today. Precise, snug, and proven, this 99mm last shell has become the definitive freestyle boot of the modern era.

BUCKLES

3-piece, 3-buckle style is designed for freestyle performance

POWER STRAP

Powerstrap closure locks your shin in place for control

SOLE

Alpine soles work well with reliable freestyle bindings

BOA® on ski boots? Yep, you read that right. It’s the biggest advancement in skiing, let alone boot fitting in sixty years. You’ve seen this feature on snowboard boots, bike shoes, and even running shoes, so it’s about time we put our heads together with the minds at BOA® Fit System to bring something new to skiing, with a laser focus on performance.

FLEX: 7/10

LAST: MultiFit™️ last, ranging from 97mm -104mm. Fitting a wide range of feet right out of the box and eliminating the need for both a “Low Volume” and “Mid Volume” fit.

SKIER TYPE: Advanced / Expert

LINER

There’s so much tech inside the Recon 120, it’s hard to know where to start. A heat-moldable liner provides the perfect balance between comfort and support. K2 have integrated internal and external J-Bars to ensure proper heel hold and made the toebox seamless, making the fitting process smooth as silk.

Precisionfit Pro Liner – Pre-molded and lasted with Ultralon heat-moldable foam. Featuring an asymmetric tongue, pre-molded ankle pockets, and a high-density power collar for a firm-but-comfortable performance fit

SHELL

Say goodbye to all your boot-fitting woes, with the new Recon 120 BOA® . Its redesigned shell delivers a better “wrap,” and a more even pressure distribution across the foot. Gone are traditional pain hotspots caused by overtightened buckles, the Recon 120 BOA® boots are outfitted with a micro-adjustable fit, even pressure distribution and an unmatched heel hold.

BUCKLES

POWER STRAP

Non-Elastic Cam Strap

SOLE

GripWalk ISO 23223 Outsoles – Removable and interchangeable rockered soles designed to work with GripWalk binding systems for better grip and comfort while walking, standing, and hiking.

Building on the success of bootboard technology, K2 have added customizable heel inserts to be able to fine-tune the feel. The boot board inside the Recon 120 BOA® comes with a rigid and responsive heel insert, and this boot also ships with a softer, damper, Harshmellow™️ insert for more impact absorption.

Finally, a freeride boot for younger shredders. Featuring the same walk mode, tech inserts, heat-moldable shell, and sturdy downhill pedigree as the adult-sized Mindbender 130 boot, the Mindbender Team Jr has everything a budding freerider needs to take their skills from the resort to the backcountry and back again.

BEST FOR: Freeskiing / Big Mountain / Powder

FLEX: 5/10 - 90-80 depending on size

LAST WIDTH: 100mm

SKIER ABILITY: Advanced / Expert 

LINER

Luxfit Tour Liner – Pre-molded and lasted with Ultralon heat-moldable foam. Features a medium-density foam, pre-molded ankle pockets, and a medium-density collar. Includes a tour notch at the back of the ankle for increased comfort and range of motion while hiking and skinning.

SHELL

OTHER FEATURES

POWER STRAP - 40mm Velcro Powerstrap

FULLY HEAT MOLDABLE - Both the boot's shell and cuff are capable of being heat-molded to a variety of foot shapes for a true custom fit.

GRIP WALK - Removable and interchangeable ISO 23223 alpine rockered soles collaboratively designed to work with Marker’s Grip Walk binding system for better grip and added comfort when walking and standing in boots, but doesn’t compromise the power transmission and release function between the boot and binding when skiing. Preinstalled.

INTEGRATED TECH FITTINGS: Tech fittings in the toe and heel are fully integrated into the shell injection, allowing for compatibility with both tech bindings and alpine DIN bindings.

The K2 Mindbender 115 women's-specific ski boot is for women who need one boot to rule the resort and the backcountry. Equipped with a more aggressive 115 flex, a heat-moldable Powerlite Shell, Integrated Tech Fittings, and a walk mode boasting a 50-degree range of motion, these boots are some of our most lightweight and responsive yet. The Mindbender 115's will keep you equipped for whatever the mountains have in store.

BEST FOR: Freeriding / Powder / Touring / Big Mountain

FLEX: 8/10 

LAST WIDTH: 98mm

SKIER TYPE: Advanced / Expert

LINER

POWERFIT PRO TOUR LINER - Pre-molded and lasted with Ultralon heat-moldable foam. Featuring stiffer foam and a stiff, asymmetric tongue for added power and energy transmission, pre-molded ankle pockets, and a high-density power collar. Includes a tour notch at the back of the ankle for increased comfort and range of motion while hiking and skinning.

SHELL

POWERLOCK SPYNE: A performance-oriented walk mode designed for ski touring that offers a 50-degree range of motion. When in ski mode, Powerlock Spyne provides a powerful and secure connection for uncompromised downhill performance.

INSTEP

FASTFIT - Softer TPU material is used in the instep area of select models' shells for quick and easy entry and exit.

OTHER FEATURES

ENERGY INTERLOCK - A rivet-free technology that integrates the cuff and shell, putting less stress on the boot’s material and producing a smoother, progressive flex.

POWERLOCK SPYNE - A performance-oriented walk mode designed for ski touring that offers a 50-degree range of motion. When in ski mode, Powerlock Spyne provides a powerful and secure connection for uncompromised downhill performance.

FULLY HEAT MOLDABLE - Both the boot's shell and cuff are capable of being heat-molded to a variety of foot shapes for a true custom fit.

GRIP WALK - Removable and interchangeable ISO 23223 alpine rockered soles collaboratively designed to work with Marker’s Grip Walk binding system for better grip and added comfort when walking and standing in boots, but doesn’t compromise the power transmission and release function between the boot and binding when skiing. Preinstalled.

INTEGRATED TECH FITTINGS - Tech fittings in the toe and heel are fully integrated into the shell injection, allowing for compatibility with both tech bindings and alpine DIN bindings.

FRICTION-FREE CUFF PIVOT - An easy-hinging cuff pivot designed to provide minimal resistance while in walk mode.

A ONE-BOOT QUIVER FOR AGGRESSIVE SKIERS WHO WON’T BE CONFINED TO THE RESORT.

Built with a heat moldable Powerlite shell, Friction Free Cuff Pivot, Tech Fittings and a burly 130 flex, the K2 Mindbender 130 men’s ski boot is the versatile freeride boot you need for performance on and off-piste.

When it comes time to venture beyond the resort, flip the Powerlock Spyne into walk mode and appreciate the impressive 50-degree range of motion as you power uphill to your next objective. Precision and versatility meet uncompromised downhill performance with the K2 Mindbender 130s.v

BEST FOR: Freeskiing / Big Mountain / Powder / Touring

FLEX: 8/10

LAST WIDTH:  98mm

SKIER TYPE: Advanced / Expert

LINER

POWERFIT PRO TOUR LINER - Pre-molded and lasted with Ultralon heat-moldable foam. Featuring stiffer foam and a stiff, asymmetric tongue for added power and energy transmission, pre-molded ankle pockets, and a high-density power collar. Includes a tour notch at the back of the ankle for increased comfort and range of motion while hiking and skinning.

SHELL

POWERLITE - K2's highest-performance shell design, utilizing shell walls of varying thicknesses and four different types of TPU to provide the ultimate combination of lightweight and responsiveness.

INSTEP

FASTFIT - Softer TPU material is used in the instep area of select models' shells for quick and easy entry and exit.

OTHER FEATURES

ENERGY INTERLOCK - A rivet-free technology that integrates the cuff and shell, putting less stress on the boot’s material and producing a smoother, progressive flex.

POWERLOCK SPINE - A performance-oriented walk mode designed for ski touring that offers a 50-degree range of motion. When in ski mode, Powerlock Spyne provides a powerful and secure connection for uncompromised downhill performance.

FULLY HEAT MOLDABLE - Both the boot's shell and cuff are capable of being heat-molded to a variety of foot shapes for a true custom fit.

PEBAX BIO-RESIN - Lightweight, eco-friendly material for energetic and consistent flex across a wide range of temperatures.

GRIP WALK - Removable and interchangeable ISO 23223 alpine rockered soles collaboratively designed to work with Marker’s Grip Walk binding system for better grip and added comfort when walking and standing in boots, but doesn’t compromise the power transmission and release function between the boot and binding when skiing. Preinstalled.

INTEGRATED TECH FITTINGS - Tech fittings in the toe and heel are fully integrated into the shell injection, allowing for compatibility with both tech bindings and alpine DIN bindings.

FRICTION-FREE CUFF PIVOT - An easy-hinging cuff pivot designed to provide minimal resistance while in walk mode.

The Mindbender 120 BOA® boot pairs a heat moldable Powerlite Shell construction with the micro-adjustability of the BOA® Fit System and MultiFit Last resulting in unparallel performance and fit. These boots are chalked full of technology – featuring FastFit instep for easy entry and exit as well as integrated tech fittings and Powerlock Spyne walk mode boasting 50 degrees range of motion. The Mindbender 120 BOA® boots are perfect for the freeride skier looking for one boot to do it all. The Mindbender 120 BOA® is hard to beat.

FLEX: 7/10

LAST: 97mm

SKIER TYPE: Advanced / Expert / Touring

LINER

PrecisionFit Pro Tour Liner – Ultralon® heat moldable closed-cell foam

SHELL

BUCKLES

POWER STRAP

Non-Elastic Cam Strap

SOLE

The FL3X Diverge SC was meticulously designed to meet the needs of Sammy Carlson’s unique style. Whether Sammy’s boosting backcountry kickers, hopping on the sled, or preparing to drop into a technical line, the Diverge SC delivers. Equipped with an Intuition Pro Tour Wrap, removable 120 Flex Tongue, and lightweight Diverge Tour 3-Piece Shell. The Diverge SC is the tool you’ve been looking for.

SKIER TYPE: Advanced / Expert / Touring

FLEX: 7/10 

LAST WIDTH: 102mm

LINER

Intuition Pro Tour Wrap – Slip-on the Intuition Pro Tour Wrap and get ready to motor on up the skin track. Crafted out of Intuition® Foam, and featuring a tour notch and lace-up system, the Intuition Pro Tour Wrap offers the added comfort and performance your boot is missing.

SHELL

BUCKLES

3 Light Alloy

POWER STRAP

Cam Booster Strap – Booster Straps provide maximum ski boot performance, increased control and shin protecting shock-absorption.

SOLE

GripWalk ISO 23223 Outsoles – Removable and interchangeable rockered soles designed to work with GripWalk binding systems for better grip and comfort while walking, standing, and hiking.

ADDITIONAL

Integrated Tech Fittings – Tech fittings in the toe and heel are fully integrated into the shell injection, allowing for compatibility with both tech and DIN bindings.

The BFC 120 is for experienced skiers who need a bit more room in their ski boots, without compromising support and responsiveness. With a 103mm last and a performance-oriented 120 flex, these boots are packed with features like our new and improved Cushfit Pro liner, updated Après Mode, Hands Free Entry, and a new, sleek, fully heat-moldable shell. The BFC 120 focuses on delivering both comfort and an uncompromised downhill performance.

SKIER TYPE: Advanced / Expert

FLEX: 7/10 

LAST WIDTH: 103mm

LINER

CUSHFIT LINER - Maintains the renowned comfort of the original Cushfit liner, but with a notable increase in support and performance thanks to the use of Ultralon foam, similar to what is used in our Powerfit Pro and Precisionfit Pro liners.

SHELL

OTHER FEATURES

POWER STRAP - 40mm Velcro Powerstrap

HANDS-FREE ENTRY - Dual material overlap for intuitive and easy hands-free exit and entry.

APRES MODE 2.0 - A new and improved walk mode offering a massive 50-degree range of motion. A lever on the back of the boot unlocks the upper cuff from the lower shell, allowing for increased comfort and convenience when walking from the car to the lift

FULLY HEAT MOLDABLE - Both the boot's shell and cuff are capable of being heat-molded to a variety of foot shapes for a true custom fit.

GRIP WALK - Removable and interchangeable ISO 23223 alpine rockered soles collaboratively designed to work with Marker’s Grip Walk binding system for better grip and added comfort when walking and standing in boots, but doesn’t compromise the power transmission and release function between the boot and binding when skiing. Preinstalled.

Out-of-the-box comfort meets true on-snow performance in the BFC W 105. Designed for advanced female skiers who prefer a roomier fit, the brand new Cushfit Pro liner, a heat-moldable shell, an updated Après Mode combine to create a boot that accommodates a wide variety of feet without sacrificing the support and responsiveness that experienced skiers' demand.

FLEX: 7/10

LAST: 103mm

SKIER TYPE: Advanced / Expert

LINER

Cushfit Pro Liner – A new liner developed for the BFC 105, the Cushfit Pro uses firmer EVA foam for better performance without sacrificing comfort.

SHELL

BUCKLES

4 Aluminum Micro-Adjustable Lightweight Buckles

POWER STRAP

40mm Velcro Strap

SOLE

GripWalk ISO 23223 Outsoles – Removable and interchangeable rockered soles designed to work with GripWalk binding systems for better grip and comfort while walking, standing, and hiking.

Outfitted with classic Anthem construction — you’ll find the same stealthy, ultra-precise, fully customizable, 125 flex-rated high-performance boot, but with added integrated tech fittings for the backcountry lines that require an alpine boot performance.

The Anthem Team boots feature stiffer foam, and an asymmetric tongue for added power and energy transfer. Ideal for the woman who needs both alpine and freeride performance without having to change boots.

FLEX: 9/10

LAST: 98mm

SKIER TYPE: Advanced / Expert

LINER

Pre-molded and lasted with Ultralon heat-moldable foam. Featuring stiffer foam and a stiff, asymmetric tongue for added power and energy transmission, pre-molded ankle pockets, and a high-density power collar.

SHELL

K2's highest-performance shell design, utilizing shell walls of varying thicknesses and four different types of TPU to provide the ultimate combination of light weight and responsiveness.

A rivet-free technology that integrates the cuff and shell, putting less stress on the boot’s material and produces a smoother, progressive flex.

A rear co-injected “Y” shaped support that adds strength and power to the Energy Interlock in order to maximize fore/aft flex efficiency and lateral stiffness for responsiveness in every type of terrain.

Both the boot's shell and cuff are capable of being heat-molded to a variety of foot shapes for a true custom fit.

Tech fittings in the toe and heel are fully integrated into the shell injection, allowing for compatibility with both tech bindings and alpine DIN bindings.

BUCKLES

POWER STRAP

Feel locked in like never before -- the Booster Cam Strap increases performance and responsiveness by cinching tighter than a traditional power strap resulting in exceptional power transmission and precise handling.

SOLE

Removable and interchangeable ISO 23223 alpine rockered soles collaboratively designed to work with Marker’s Grip Walk binding system for better grip and added comfort when walking and standing in boots, but doesn’t compromise the power transmission and release function between the boot and binding when skiing. Preinstalled.

Responsive, beyond rugged, and full of our most premium features, the K2 Aspect
is a technical boot with high aspirations. With a heat-radiating, snowcamp-ready,
Intuition® Spaceheater™ liner, BOA® Conda™ heel retention system, and a cramp-on
compatible Vibram® Mountaineer outsole, the Aspect is ready for the most demanding
of missions.

The Insano is quite literally how the name describes it. Fitted with our Intuition™ Center Tongue Dream Liner and H4 BOA® Focus Fit System, which provides a two-zone precise fit system for ultimate heel hold and stability. Fiber Reinforced Flex Slime Tongue™ provides rebound and damping. The new Michelin® Traverse Outsole emphasizes grip and response underfoot, and coupled with the fact that the Insano is the stiffest boot in our line, this thing is built for all-mountain response all the time.

FLEX: 10/10

ABILITY: Advanced / Expert

Flex

Rebound Heel Counter™ 2.0 – New dual density injected TPU heel counter offers the ability to tailor the flex in the boot while providing the durable performance of TPU.

Fiber Reinforced Flex Slime Tongue™ – The RIDE exclusive Slime Tongue™ reduces breakdown in forward flex for a more consistent ride over a longer life of the boot. The revolutionary injected urethane design provides impressive rebound and dampening, allowing the rider to ride longer, harder with less fatigue.

Fit

Silver Last – A performance fit designed for men.

1:1 Lasting – 1:1 lasting ensuring a seamless liner to shell integration for all whole and half sizes. Liner lasts anatomically shaped to your foot offers premium out of box liner comfort while shell last shaping precisely merges together for a uniform supportive fit.

IN2GRATED™ Construction – In2grated™ Construction creates the lightest weight, shortest length performance boots on the market, hands down. The liner is factory molded inside the shell to create the most efficient "net fit", leading to less pack out for better overall comfort.

Articulated Cuff

Liner

Intuition™ Dream Liner – Multi-density foam surrounded in a supportive skeletal structure for maximum rebound and dreamy performance.

Black Gold™ Liner Mesh – This bamboo charcoal infused material naturally mitigates odors and moisture. Other benefits include improved temperature regulation and circulatory function.

Internal J Bars – Superior ankle and heel hold with added support.

External J Bars – Additional ankle and heel hold.

Cored Ankle Pockets – Anatomically correct fit for ultimate heel hold.

Center Tongue Liner

Slip/Grip Top Closure

Lacing System

H4 Boa® Focus Fit System – Dial activated fit system that allows for a two-zone closure system for precise fit.

The Closer™ Lace Guide – Offers two times the power to close your boot securely. The Closer™ Lace Guide is centered over the forefoot to drive lace power down low to even the lace tension throughout the entire boot. Accompanied by Boa® Fit System, the even-tightening of The Closer™ Lace Guide takes the fit system to the next level and provides an incredibly Precise fit.

Tallboy Harness Liner Lacing – Ideal for all around performance, the Tallboy™ extends higher above the ankle with a fourth lace loop for a supportive flex and responsive fit.

Lock Down™ Turbo Liner Lacing – A secure, no slack lace mechanism to lock your laces in place.

Footbed

Impacto™ Elite Insole – Multi-density insole with an added support structure and impact element in the heel for cush landings and all day comfort.

Sole

Michelin® Traverse Sole – A durable blend of Michelin® rubber and phylon that makes for unequaled grip.

Additional Features

HDR Premium Synthetics™ – RIDE’s Premium PU material utilizes a proprietary resin that substantially improves durability and wear resistance. Used in high abrasion zones where bindings and board edges create focused wear, RIDE’s Premium PU has unmatched performance.

Heat Reflective Foil – Redirects heat underneath the foot and in the toe to help keep in the toasty warmth while charging up last chair.

TPU Toe Cap – Injected TPU toe cap substantially improves durability and simplifies toe construction.