Rider Type:  All-Mountain / Freestyle

Shape: True Twin

Flex:  7/10 Aggressive / Stiff

Ability Level: Advanced / Expert

Rocker: Full Camber

CAMBER

CamRock 2-4-2 – The response of camber with the floatability of rocker. Camber between your feet acts as a spring, keeping your contact points on the ground as you go in and out of turns and allowing you to keep that edge hold longer. Once compressed the camber will accentuate the rocker and lift the nose out more, allowing it to float.

CORE

Poplar / Paulownia / Bamboo – Creates a lighter, more responsive core than the Full Poplar. The Poplar + Bamboo uses the same durable core, lightens it up by replacing 30% of the Poplar with Paulownia and then inserts two bamboo stringers down the full length for added pop and response.

Triaxal Glass + Carbon

SHAPE

Asymmetrical True Twin – The Asym Twin applies a tighter, deeper heelside radial sidecut compared to the toe. In effect, balancing out the difference in a body’s natural tendency that we get with directional boards, allows you to ride switch better than you ever have. Regular or goofy - it’s still a true twin. Just flip it around.

Introducing the All-out Snowboard, your ultimate winter companion that combines surf-inspired vibes with YES Snowboard's unique touch. Carefully crafted to cater to all your snowboarding needs. With its tapered MidBite outline and slamback inserts, you can conquer those epic powder days like never before. Say goodbye to switching boards throughout the season because this versatile gem is the only one you’ll need. Designed with a twin construction, the All-out Snowboard is not just limited to powder shredding. It effortlessly transforms into a freestyle powerhouse, ready to dominate the park and pipe. Picture yourself riding the waves of an empty pipeline—it’s an exhilarating dream that becomes a reality with this board. Embrace the winter season to the fullest and optimize your snowboarding experience with the All-out Snowboard. Whether you’re seeking adrenaline-fueled adventures or soulful rides, this board has you covered

Rider Type:  All-Mountain

Shape: Directional Twin

Flex: 7/10

Ability Level: Advanced / Expert

Rocker: Rocker / Camber / Rocker

CAMBER

Traditional Camber

SHAPE

Directional Twin - best of both worlds

Tapered Midbite blends the response of a narrow waist width with the stability of a wider nose and narrower tail for powder flotation. The design steps a single section of each sidecut inwards between the insert packs. This single-long disruption of the sidecut between the bindings makes the waist width narrower, providing a quicker edge-to-edge response. Meanwhile, from your bindings out to the end of the sidecut, we maintain a wider board width that improves float in pow and is a stable platform. The Step inwards on the front is deeper than the Step outwards on the back creating a slight taper in the tail allowing the tail to be just a little narrower than the nose but without losing the twin feel.

CORE

Poplar Paulownia Bamboo - Creates Creates a lighter, more responsive core than the Full Poplar. The Poplar + Bamboo uses the same durable core, lightens it up by replacing 30% of the Poplar with Paulownia, and then inserts two bamboo stringers down the full length for added pop and response.

Triax Glass

BASE

Sintered True

SPECS

Introducing the All-out Snowboard, your ultimate winter companion that combines surf-inspired vibes with YES Snowboard's unique touch. Carefully crafted to cater to all your snowboarding needs. With its tapered MidBite outline and slamback inserts, you can conquer those epic powder days like never before. Say goodbye to switching boards throughout the season because this versatile gem is the only one you’ll need. Designed with a twin construction, the All-out Snowboard is not just limited to powder shredding. It effortlessly transforms into a freestyle powerhouse, ready to dominate the park and pipe. Picture yourself riding the waves of an empty pipeline—it’s an exhilarating dream that becomes a reality with this board. Embrace the winter season to the fullest and optimize your snowboarding experience with the All-out Snowboard. Whether you’re seeking adrenaline-fueled adventures or soulful rides, this board has you covered

Rider Type:  All-Mountain

Shape: Directional Twin

Flex: 7/10

Ability Level: Advanced / Expert

Rocker: Rocker / Camber / Rocker

CAMBER

Traditional Camber

SHAPE

Directional Twin - best of both worlds

Tapered Midbite blends the response of a narrow waist width with the stability of a wider nose and narrower tail for powder flotation. The design steps a single section of each sidecut inwards between the insert packs. This single-long disruption of the sidecut between the bindings makes the waist width narrower, providing a quicker edge-to-edge response. Meanwhile, from your bindings out to the end of the sidecut, we maintain a wider board width that improves float in pow and is a stable platform. The Step inwards on the front is deeper than the Step outwards on the back creating a slight taper in the tail allowing the tail to be just a little narrower than the nose but without losing the twin feel.

CORE

Poplar Paulownia Bamboo - Creates Creates a lighter, more responsive core than the Full Poplar. The Poplar + Bamboo uses the same durable core, lightens it up by replacing 30% of the Poplar with Paulownia, and then inserts two bamboo stringers down the full length for added pop and response.

Triax Glass

BASE

Sintered True

SPECS

The Heartbreaker is made for all-mountain progression. The standard camber profile combines camber underfoot with rocker at the tip and tail for the perfect combination of snap and easy turn initiation. A Quadratic Sidecut improves turn initiation, exit and edge grip. Slimewalls® provide a smooth ride and increase durability by absorbing impact. The Heartbreaker is a soft-flexing all-mountain board for riders of all ability.

Rider Type: All-Mountain 

Shape: True Twin

Flex: Soft

Rocker: Rocker / Camber / Rocker

Ability Level: Beginner / Intermediate 

CAMBER

SPECS:

The Zero will enhance your park and freestyle riding in numerous ways this winter

The Zero is a unisex snowboard that knows no boundaries. It can be ridden by anyone, anywhere, at any time, thanks to Twin Hybrid Rocker and Asymmetrical Quadratic Sidecut. The timeless graphic is a throwback to snowboardings days of classic, simple and unique look but its packed with technology to mirror todays landscape of innovation, with features like Flat Kick Tips on the nose and tail and a Performance Core to give you extra stability in the park and the streets. A favorite of team riders Jill Perkins and Reid Smith, the Zero is the next big thing in the RIDE line.

Rider Type:  All-Mountain / Freestyle

Shape:  Asymmetrical Twin Hybrid Rocker

Flex:  Medium

Rocker:  Twin Hybrid  / Rocker-Camber-Rocker

Ability Level:  Intermediate / Advanced

CAMBER

Twin Standard Camber – A true twin shape hybrid profile that has more camber than rocker.

FLEX

Medium Response

SHAPE

Asymmetrical Quadractic Sidecut – Blending of three radii to improve turn initiation/exit while providing the best grip possible. This design is uniquely formulated for each model based on its shape and riding style.

Flat Kick Tips

CORE

Performance™ Core – High strength Aspen is combined with Bamboo and lightweight Paulownia wood to provide the perfect balance of strong and light.

LAMINATES

Double Impact Plates – Added underneath each binding area to improve compressive strength and prevent board breaks where it matters most. Offered in two levels, Single and Double.

Carbon Array 3™ – This power distribution technology provides total board control in every stance location. Widespread carbon stringers placed at the binding zone gather input from any stance width and all pressure angles. Rider input is then channeled to the opposing contact point for maximum board control. Offered in two levels of technology, 3 & 5.

Bi-axial Glass – 90° and 0° angles, fun and forgiving.

SIDEWALLS

Slim Walls® – A 3D composite structure positioned over Slimewall® material reduces weight, dampens the ride, and results in superior energy transfer

BASE

Sintered, Stone Ground Base – High-end sintered 4000 Ptex base material that is more durable, harder and faster than extruded.

EDGES

Cleave Edge™ – Nearly 50% more steel means improved durability.

SPECS:

Twice the fun of a Warpig in a twin version of one of our best-selling boards

The TWINPIG is a twin version of our most popular WARPIG model. Our engineering team took what we liked about the versatility and aggression of the WARPIG and packaged it in a twin shape for someone looking for more freestyle performance while still approaching the mountain with a thrash everything mentality that the PIG series is known for. Size the TWINPIG down 3 to 6 cms from your standard twin to take advantage of its unique shape and profile. The TWINPIG isn't as wide as the WARPIG, but it's still wider than a traditional twin shape. The asymmetrical shaping improves heelside turn initiation and control with different radii for the heel and toeside edges. This allows the wider platform to effortlessly transfer between edges. A sintered base supplies a faster, more durable ride. The TWINPIG is a park-focused deck that packs all the fun of our WARPIG into a twin shape and is suitable for all ability levels.

Rider Type:  All-Mountain / Freestyle

Shape:  Asymmetrical, True Twin

Flex:  Soft

Rocker:  Rocker / Camber / Rocker

Ability Level:  Intermediate / Advanced

CAMBER

Twin Hybrid Rocker – A true twin shape hybrid profile that has more rocker than camber.

FLEX

Mellow Response

SHAPE

Asymmetrical Shaping – Asymmetric sidecut shaping improves heelside turn initiation and control. Offering perfect balance while turning through different radii for the heel and toe side edges, the board just feels right!

Quadractic Sidecut – Blending of three radii to improve turn initiation/exit while providing the best grip possible. This design is uniquely formulated for each model based on its shape and riding style.

CORE

Performance™ Core – High strength Aspen is combined with Bamboo and lightweight Paulownia wood to provide the perfect balance of strong and light.

LAMINATES

Double Impact Plates – Added underneath each binding area to improve compressive strength and prevent board breaks where it matters most. Offered in two levels, Single and Double.

Hybrid Glass – Triaxial on top, biaxial on base; balanced torsional flex and stiffness for better response with speed.

SIDEWALLS

Roll-In Construction – Unique 3D structure built around the urethane Slimewall® sidewalls. Designed to increase overall board strength, prevent topsheet chipping, and reduce weight.

Slim Walls® – A 3D composite structure positioned over Slimewall® material reduces weight, dampens the ride, and results in superior energy transfer

BASE

Sintered, Stone Ground Race Base – High-end sintered 4000 Ptex base material that is more durable, harder and faster than extruded.

EDGES

Cleave Edge™ – Nearly 50% more steel means improved durability.

TOPSHEET

Topless Topsheet – By transferring graphics directly to the fiberglass, Topless Construction removes the need to have any topsheet material. This process improves overall durability and reduces weight.

SPECS:

Developed with women’s morphology in mind, this boot combines all the performance and fit of an S/PRO boot with an anatomic last of 102 mm. The wider shell construction offers more room and helps you experience uncompromised performance and reactivity at every turn, and it's Gripwalk premounted for more safety grip & walking comfort.

For skiers that can comfortably ski across the whole resort and are keen to get better on icy slopes and in variable conditions.

A last width > equal to 102 mm (MP 26./26.5) offers a more generous boot volume and is ideal for skiers with wider feet and broader calves. To identify one's preferred last, the foot's width between the first and the fifth metatarsal bone is measured to gather an overview of the skier's natural foot shape and volume.

• STRAP - Sense 35mm: This 35mm strap holds the foot securely in place and optimizes power transmission.
• PADS - Gripwalk premounted ISO 23223: GripWalk pads are premounted and their specific shape offers improved walking comfort and more grip no matter the conditions.
• SPECIFIC - Women calf adjuster: The Women Calf Adjuster allows more fitting options (perimeter +11mm & height +4mm) that adapt to different women's calf morphologies.
• SPECIFIC - Women liner: This women's liner with anatomic tongue made of highly moldable foams provides better shin and instep comfort in sensitive zones.
• ADJUSTMENT - Riveted oversized pivot: The Riveted Oversized Pivot ensures perfect power transmission between cuff and shell.
• BUCKLES: 4 riveted aluminium
• BUCKLES - Tool free tooth adjustment: Easy, tool-free & efficient personalization of each calf volume is achieved by rotating and moving the lower buckle.

Terrain: All mountain

Ability: Intermediate

Boot width: Wide

Weight: 1626g per boot

The WARPIG shape has won multiple snowboard tests for both all-mountain and freestyle categories, which is a rare feat in modern snowboarding. The versatility of the WARPIG is unmatched. This board will allow you to lay down carves hit huge jumps and ride big mountain lines. The WARPIG sees the entire mountain as an opportunity to thrash at full speed. A Tapered Bi-Radial Sidecut maximizes grip and allows the WARPIG to transition from edge to edge like a traditional narrow snowboard while getting the float and stability of a wider modern deck. A Performance Core combines Aspen, Bamboo, and Paulownia wood to provide the perfect balance of strength and light. The WARPIG is a battle-tested all-mountain board for intermediate to advanced riders who aspire to crack the skull of winter and feast on its delicious pink insides.

Rider Type:  All Mountain

Shape:  Directional

Flex:  Medium

Rocker:  Rocker / Flat / Rocker

Ability Level:  Intermediate / Advanced

CAMBER

Need some help with your snowboard purchase? Check out our snowboard buyers guide or contact us!

Designed for stability and quick edge-to-edge control in all conditions. With a directional extra camber profile this board is built for stability and pop while giving just enough rise in the nose to float on those deeper days. The Deep Fake is designed to be ridden in a standard length, no downsize is needed. The tapered linear quadratic sidecut is designed for smooth turn initiation and powerful grip through turns without washing out. Deep Fake features the brand-new Metal Slim Wall construction, a section of titanal metal layered with urethane running the edge of the board, increasing dampening, durability, and responsiveness. This is a premium all-mountain board and features RIDE's performance core, Carbon Array 5, Sintered Stone Ground Race Base, and all-new Bio-resin. Deep Fake is built for riders who take advantage of all snow conditions while staying under the radar.

Rider Type:  All Mountain / Freeride

Shape: Directional

Flex: Medium to Stiff

Ability Level: Intermediate / Advanced / Expert

Rocker: Extra Camber

CAMBER

Directional Extra Camber – A directional shape with a hybrid profile that has more camber than rocker.

BASE

Sintered, Stone Ground Race Base – High-end sintered 4000 Ptex base material that is more durable, harder and faster than extruded.

CORE 

PERFORMANCE™ CORE: High strength Aspen is combined with Bamboo and lightweight Paulownia wood to provide the perfect balance of strong and light.

SIDEWALLS

METAL SLIM WALLS: Metal Slim Wall that utilizes full-length Titanal Aluminum strips laminated into a urethane composite sandwich which provides superior edge hold, more efficient energy transfer, and unbeatable durability.

SIDECUT

Linear Quadric Sidecut - A directional sidecut utilizing Quadratic curvature from the tip to the rear insert pack, then progressing into a linear section into the tail. This creates smooth catch-free turn initiation and powerful support through the turn exit without losing grip.

LAMINATES:

SINGLE IMPACT PLATES LAMINATES: Added underneath each binding area to improve compressive strength and prevent board breaks where it matters most. 

CARBON ARRAY 5: This power distribution technology provides total board control in every stance location. Widespread carbon stringers placed at the binding zone gather input from any stance width and all pressure angles. Rider input is then channeled to the opposing contact point for maximum board control. Offered in two levels of technology, 3 & 5.

PRE-CURED GLASS FIBERGLASS: USA-made pre-cured fiberglass optimizes glass to resin ratios to create the most consistent flex pattern possible. No other glass provides this level of stability and control.

SPECS:

Half the size but twice the technology of other kids boards on the market

For little tykes that wanna go big, the Zero Jr. is a Twin Hybrid Rocker board that aims to reduce edge catching, make it easier to initiate turns so they can get the hang of the edge-to-edge transition of riding groomers and soften the vibrations that can cause kids to fall. Packed with similar construction as our adult-size Zero model, the Zero Jr. is the perfect way to introduce your little one to riding or let them take it to the next level if they have their feet solidly under them after a few winters on the hill.

Rider Type:  All Mountain  

Shape:  Asymmetrical Twin Hybrid Rocker

Flex:  Soft

Rocker:  Rocker / Camber / Rocker

Ability Level:  All Levels - Youth

TWIN HYBRID CAMBER:

A true twin-shape hybrid profile that has more camber than rocker.

LINEAR QUADRATIC SIDECUT:

A directional sidecut utilizing Quadratic curvature from the tip to the rear insert pack, then progressing into a linear section into the tail. This creates smooth catch-free turn initiation and powerful support through the turn exit without losing grip.

SINTERED BASE:

High-end sintered 4000 Ptex base material that is more durable, harder and faster than extruded.

PERFORMANCE™ CORE:

High strength Aspen is combined with Bamboo and lightweight Paulownia wood to provide the perfect balance of strong and light.

SLIM WALLS:

RIDE's Slim Wall technology is the evolution of our Roll-in Construction to its extreme limit. By creating a fully 3-D composite structure over Slimewall® material, this revolutionary technology results in more efficient energy transfer, lighter weight construction, and even better damping.

CARBON ARRAY LAMINATES:

This power distribution technology provides total board control in every stance location. Widespread carbon stringers placed at the binding zone gather input from any stance width and all pressure angles. Rider input is then channeled to the opposing contact point for maximum board control. Offered in two levels of technology, 3 & 5.

BIAXIAL GLASS FIBERGLASS:

90° and 0° angles, fun and forgiving.

IMPACT PLATES LAMINATES:

Added underneath each binding area to improve compressive strength and prevent board breaks where it matters most. Offered in two levels, Single and Double.

STANDARD TOP SHEET:

Durable Urethane topsheet material with graphics only RIDE can bring you.

CLEAVE EDGE™ STEEL:

Nearly 50% more steel, delivers unmatched resistance to edge cracking and can be detuned to larger radii.

SPECS:

Designed to ride all over the mountain with a focus on power and drive the Peace Seeker is a collabrorative between Jake Blauvelt and Ride Snowboard engineers. The unique Bi-Radial sidecut design offers the lightning-fast turn initiation of our pig models and the shape and construction allow for limitless support off the tail for longer more sustained turns. The longer nose shape eats up high frequency vibrations and keeps the nose floating above powder and chop at top speed. Our new glass pedal construction and tail design helps to squeeze every last drop of power out of your turns. Forget what you think about shorter snowboards and prepare to have your mind blown. This board is exactly what you’d expect from Jake, fast precise and smooth.

Rider Type:   All-Mountain / Freeride / Powder

Shape: Directional

Flex: Stiff

Rocker: Camber / Rocker Tip and Tail

Ability Level: Advanced / Expert

Camber

Directional Extra Camber – A directional shape with a hybrid profile that has more camber than rocker.

Flex

Aggressive Response

Shape

Tapered Bi-Radial Sidecut – A twin sidecut which allows for the underfoot width of a wide board in the tip/tail width of a standard size. This design provides improved leverage on landings, grip through turns, and stability on flat base.

Core

Performance™ Core – High strength Aspen is combined with Bamboo and lightweight Paulownia wood to provide the perfect balance of strong and light.

Laminates

Double Impact Plates – Added underneath each binding area to improve compressive strength and prevent board breaks where it matters most. Offered in two levels, Single and Double.

Carbon Array 5™ – This power distribution technology provides total board control in every stance location. Widespread carbon stringers placed at the binding zone gather input from any stance width and all pressure angles. Rider input is then channeled to the opposing contact point for maximum board control. Offered in two levels of technology, 3 & 5.

Glass Pedal – A diamond shaped secondary layer of glass in the tail of the board that provides extra torsional stiffness and power in the tail without effecting the flex of the tip.

Hybrid Glass – Triaxial on top, biaxial on base; balanced torsional flex and stiffness for better response with speed.

Sidewalls

Carbon Slimwalls® – A 3D composite structure positioned over Carbon-backed Slimewall® material reduces weight, dampens the ride, and results in superior energy transfer.

Base

Sintered, Stone Ground Base – High-end sintere

The shape of the all-new K2 Isolator Splitboard pays homage to K2's best-selling Volume Shift™ model, the Excavator, the K2 Isolator Splitboard is an all-gender tool that was built to get you deep into the backcountry…where the good stuff is.

K2 have taken a proven shape, sidecut, and camber profile and made adjustments to bring the Isolator to life. Added the ICG™ 10 carbon-fiberglass hybrid for snap, a lightweight split-specific core, and Karakoram UltraClips™ to ensure that the Isolator rides more like a solid snowboard than any other split on the market.

Rider Type: Splitboarding

Shape: Directional

Flex: 7/10

Rocker: Rocker nose / Camber underfoot

Ability Level:  Intermediate / Expert / Advanced

CAMBER

An absolute weapon for big mountain riders who demand only the best in the steep, deep and fast freeriding conditions. This one is just for the expert freerider. An all-conditions freeride board that is unbelievably responsive and stable for high-speed freeriding and freeride competitions

Rider Type:  All Mountain / Freestyle / Freeride

Rider Ability: Advanced / Expert

Shape:  Directional 

Flex:  Stiff

CAMBER

Directional Rocker - A hybrid rocker/camber flex pattern defined by more tip rocker than tail rocker and camber between the bindings. The rockered tips floats the board’s nose and improves maneuverability while the camber underfoot 

SHAPE

Directional Shape

3D Contour Base 3.0 - Freeride-focused 3D Contour Base featuring 7mm of spoon bevel in the nose and 0 to 7mm of spoon bevel in the tail. The spoon bevel starts at the rocker point.

The center of the board is perfectly flat with no spoon bevel on the edges between the contact
points. The flat base allows instantaneous edge engagement between the feet when you lean into a turn.

The spoon bevel starts at the contact point. The bevel increases very gradually so there is not an abrupt transition between the flat center of the board and the raised tip and tail edges

The spoon bevel is most defined at the tip and tail of the board. The rounded edges at the tips reduce edge catch and drag.

12.5mm Taper

CORE

Fusion Carbon - The Fusion Core is Jones's lightest wood core yet. The core is made from mostly paulownia with specifically positioned pockets of poplar for improved durability and response.

Power Plates - New wood core design featuring specially positioned dual-layer plates on both sides of the insert packs that help transfer energy, enhance board response and increase edge impact durability

Power Core - Triple-density full wood core featuring hardwood bamboo stringers for added pop and durability plus paulownia for weight savings.

Koroyd - Award-winning synthetic core material developed for the aerospace industry. Koroyd is the lightest and dampest core material we’ve ever tested. It absorbs vibrations and adds response at a fraction of the weight of wood which enhances board control and riding confidence.

Carbon / Innegra Reinforcement - Carbon Innegra fiber forms an ultra-tough hybrid composite layer that dampens the board torsionally and from tip to tail. Made in the USA.

Power Basalt Stringers - Sustainable stringer made with 100% natural fibers. Basalt stringers improve torsional response and transfer power from under your feet to the tips of the board to help eliminate nose and tail chatter

Float Pack Inserts - Allows super setback stance for deep pow days.

TOPSHEET

Ash Venneer Wood  - Thin ash wood veneer layer that functions as both a protective topsheet and a global reinforcement layer. The thin wood stringers that make up the topsheet provide even flex and suck up chatter from uneven snow conditions.

BASE

Ultra Base - Jones exclusive base material that sets new performance standards. Lab results and snow testing
show 25% better wax absorption, better glide in warm/ wet snow and better durability for grinding. We’ve also doubled the amount of wax and mixed multiple wax types for a faster factory wax in a wider range of conditions.

EDGES

Oversized recycled steel edges for added durability and improved production sustainability.

OTHER TECH

Forever Flex is a manufacturing process that helps stabilize the flex and rocker profile of a board for
it’s lifetime. Our boards now finish the first stages of production slightly overbuilt and then we “break them in” using specialized machinery that mimics extreme riding use. By flexing the fresh board fibers and epoxy at the factory the materials settle in to their final arrangement within the board layup much the same as if you rode the board for 20 days. This process helps us narrow our production tolerances so the board you buy has a more accurate specified flex and rocker profile that will change less as you ride it more.

STATS

                   158   161   162W   164   165W

Waist           24.9   25.2   26.3    25.4     26.6
Sidecut         8.5     9.1      9.3     9.3      9.4

The Velvet is the choice of Gnu team riders who approach the whole mountain like their park. It’s snappy flex and hybrid C2 contour work in synergy for pop and stability. It features intuitive asym geometry, and Magne-Traction®, so it is catch-free and responsive. The eco sublimated plant-based graphics give this ride a down to earth vibe. The Velvet is comfortable in any conditions and as balanced in the park as it is in banked slaloms or street sessions. Design conceptualized by Naima Antolin and designed by Hannah Eddy.

RIDER TYPE: All Mountain / Freestyle

Shape: Asymmetrical Twin

Flex: Medium

Ability Level: Intermediate / Advanced

CAMBER

C2 Contour – Perfectly balanced all terrain contour. Mild rocker between your feet with powerful cambers to the tips and tails. Enough power pop and precision to technically hit the biggest wedges, enough float and freedom to rip the gnarliest AK pow lines. Carves the resort, plays in the park, and slays powder.

SHAPE

ASYM Level 1 – Balance through asymmetry. ASYM Level 1 features an asymmetrical sidecut with a deeper sidecut on the heelside for power.

CORE

G Lite 2 FCS Certified Aspen + Paulownia Core – Light, strong, and poppy.

LAMINATES

Triaxial / Biaxial Fiberglass – Strong and poppy.

SIDEWALLS

UHMW Sidewalls – Tough and fast.

BASE

Eco Sublimated Sintered Base – Fast, tough, and holds wax.

EDGES

Magne-Traction® – 7 strategically located and sized edge serrations provide unreal edge hold and control in all conditions.

TOPSHEET

Eco Sublimated Poly Top – Tough and environmentally nice.

SPECS:

A classic pill freestyle shape from his beautiful mind. The C3 cambered Head Space is Forest’s twin freestyle mind expansion tool. A proven street slayer, rips any freestyle situation you might encounter at your home resort or out there with the crew. Magne-Traction® edge control, FSC certified eco core, sintered eco sublimated base. Find your feet with a board that knows anything and everything is possible.

RIDER TYPE: Freestyle / Park

Shape: Twin

Flex: Medium

Ability Level: Intermediate / Advanced

CAMBER

C3 Camber – Aggressive dominant camber zones out to the contacts combined with mild rocker between your feet. Subtle Banana rocker gives freestyle freedom with maximum end-to-end stability for big, high-speed lines. For aggressive, skilled riders.

CORE

G Lite 2 FCS Certified Aspen + Paulownia Core – Light, strong, and poppy.

LAMINATES

Triaxial / Biaxial Fiberglass – Strong and poppy.

SIDEWALLS

UHMW Sidewalls – Tough and fast.

BASE

Eco Sublimated Sintered Base – Fast, tough, and holds wax.

EDGES

Magne-Traction® – 7 strategically located and sized edge serrations provide unreal edge hold and control in all conditions.

TOPSHEET

Eco Sublimated Poly Top – Tough and environmentally nice.

SPECS:

A classic pill freestyle shape from his beautiful mind. The C3 cambered Head Space is Forest’s twin freestyle mind expansion tool. A proven street slayer, rips any freestyle situation you might encounter at your home resort or out there with the crew. Magne-Traction® edge control, FSC certified eco core, sintered eco sublimated base. Find your feet with a board that knows anything and everything is possible.

RIDER TYPE: All Mountain / Freestyle

Shape: Twin

Flex: Medium

Ability Level: Intermediate / Advanced

CAMBER

C3 Camber – Aggressive dominant camber zones out to the contacts combined with mild rocker between your feet. Subtle Banana rocker gives freestyle freedom with maximum end-to-end stability for big, high-speed lines. For aggressive, skilled riders.

CORE

G Lite 2 FCS Certified Aspen + Paulownia Core – Light, strong, and poppy.

LAMINATES

Triaxial / Biaxial Fiberglass – Strong and poppy.

SIDEWALLS

UHMW Sidewalls – Tough and fast.

BASE

Eco Sublimated Sintered Base – Fast, tough, and holds wax.

EDGES

Magne-Traction® – 7 strategically located and sized edge serrations provide unreal edge hold and control in all conditions.

TOPSHEET

Eco Sublimated Poly Top – Tough and environmentally nice.

SPECS:

The Ladies Choice has secured its place in snowboarding history with over a decade of collaboration with the most decorated female snowboarder, Jamie Anderson. Her balance between progression and playfulness is reflected in the progressive asym technology, perfectly tuned for freestyle flow. Bringing Jamie's eco-minded sensibility to our construction materials and process, the Ladies Choice is built with a clear nylon topsheet made from bio beans that shows through to the sustainably harvested FSC certified wood core. Eco sublimated graphics by Sarah King continue the decade + partnership with this all mountain freestyle work of art. Ride the Ladies Choice and channel some JA magic!

RIDER TYPE: All Mountain

Shape: Asymetical Twin

Flex: Medium

Ability Level: Intermediate / Advanced

CAMBER

C2x Contour – A shorter, more aggressive banana rocker combined with cambers that sit more underfoot. Extra solid tip and tail pressure for power, pop, precision and end-to-end stability combined with a medium amount of pressure between your feet for carving, edge hold on ice and float in pow.

CORE

G Lite 3 FCS Certified Aspen + Paulownia Core – Lightest, stronger, and most poppy.

LAMINATES

SIDEWALLS

UHMW Sidewalls – Tough and fast.

BASE

Eco Sintered Knife-cut Base – Fast, tough, and holds wax.

EDGES

Magne-Traction® – 7 strategically located and sized edge serrations provide unreal edge hold and control in all conditions.

TOPSHEET

Eco Sublimated Poly Top – Tough and environmentally nice.

SPECS: